Can you test a gem module?
yes, the GEM module controls those functions based on inputs from switches. the way to check is that you need a full blown scan tool that can read inputs and outputs of the Module.
What does the GEM module control on a 2002 f150?
The GEM module provides temporary power to the power windows, the rear wiper (for parking of the rear wiper off the liftgate glass), and the message center for ten minutes after the ignition switch is moved from the RUN to OFF position.
What is Ford SCP?
Ford SCP. Ford’s variation of J-1850 is called Standard Corporate Protocol or SCP. SCP uses a two wire twisted pair bus and is the most common network protocol used on late model Ford passenger vehicles. The signal has a 0-5 volt toggle and the SCP+ and SCP- signals are mirrored.
Can a gem module be repaired?
Some GEMS damage is caused by jump starting and the modules internal processor ends up with corrupt data in its EEprom. To fix EEprom damage in a GEM repair it will need to be reprogrammed with specialist equipment or the manufactures own system and at Go Diagnostics we have both facilities.
What does the generic electronic module control?
GEM stands for Generic Electronics Module. The equivalent to a Body Control Module in GM/MOPAR. It controls interior lights, traction control, anti-theft, remote… an automatic sample manipulating system and a process control and data acquisition computer known as the Generic Electronics Module (GEM).
What is GEM generic electronic module?
GEM stands for Generic Electronics Module. The equivalent to a Body Control Module in GM/MOPAR. It controls interior lights, traction control, anti-theft, remote… an automatic sample manipulating system and a process control and data acquisition computer known as the Generic Electronics Module (GEM).
What is GEM module focus?
The “GEM” module is the brain of your alarm/central locking/double locking/window closing. This module is for a pre facelift Ford Focus so calling it GEM isn’t accurate, it’s more like a comfort/central locking module. But it’s way more convenient calling it a GEM.
Where is the gem module on a 2002 f150?
The gem module in the 2002 Ford F-150 is located within the fuse panel in cab of the truck.To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open. On the inside, You will find a bunch of fuses.
Where is the gem module on a 2000 Ford f150?
It’s located under the far left of the dash, kind of behind and above the parking brake pedal.
What does U1262 code mean?
U1262 is a communication bus failure which means the communications system between PCM, IDM, GEM fail to communicate with each other. Sounds like a connection may be loose in the harness. The other codes all point to a system communication error (repeated Invalid or Mising Data on your AE).
Where is the gem module located on a Ford F350?
I have a 2003 f350 cc 4×4 with 7.3. where is it located ? thanks It is hooked to and behind your fuse panel. I know all 7.3L have them. Ford calls them a body control module. GEM stands for generic electric module.
What kind of scan tool does Ford use?
Produced by Hickok Corporation, this scan tool will put the automotive aftermarket shop at a ‘dealer level’ capability when working on Ford/Lincoln/Mercury vehicles. The Ford dealer techs have had access to two tools for scanning Ford products: the IDS (Intergrated Diagnostic System) and the ‘NGS.
How to diagnose a Ford communication network problem?
To diagnose this network, you will need a high-impedance DVOM and a scanner. First, hook up the DVOM (positive lead) to Pin #7 into the back of the DLC connector, the ground lead attached to the chassis. Then, with the ignition switch OFF or ON, there should be NO voltage on the network.
Where is the gem on a Ford 02-03?
02-03 does not have a GEM….I believe its called a VSM (stands to be corrected) located behind the radio on the fire wall….The GEM in the earlier models is located behing the fuse Box under the dash….