What should I do if my Cat C13 engine has problems?
If the cylinder has scuffed it is possible the oil pump is torn up, it is also possible the oil filter is compromised. If there is a lot of metal, the oil cooler should be changed. Test the radiator cap, that could be the coolant loss, inspect the air intake, and with the pan off preasure testing is a great idea. as normal tony.
How many horsepower does a C13 cat have?
New Cat C13’s, even pre 2007, are only designed for fuel mileage. So screw it if it takes your truck 5 minutes just to get up to 65 MPH. If you could find one that is in fact turned up to 450+ HP or find one with at least a 13 speed you may actually have a real machine. With a 10 speed they are SSSLLLLLLLOOOOOWWWWWW
Are there any issues with the caterpillar C-13?
A local company here (200 trucks) has a fleet of them and almost all problems are emissions related. We’ve got an older (’04) C13 and have had no issues with it. Just like all the newer engines, keep it stock and they suck. Mod them and they’re WAY better on power, fuel, reliably.
What’s the oil pressure on a Cat C13?
Drop the pan, ive seen head bolts stretch on these causing internal loss of coolant. The head bolts are one time use. no spacer plate on these series it uses a metal head gasket. min oil pressure at 1800 rpm @ operating temp is 40 to 60 psi, 10 psi min at idle.
When to change fuel filter on cat engine?
Changing fuel filter (s) is an inexpensive first “go to” procedure if you experience loss of power under high demand conditions.
Is the fuel filter on my Cat 3126 clear?
I called this morning – and I have only 1 fuel filter on my CAT 3126. It is the “fuel filter/water sep”. I do not have a primer on it. It does not have a clear bowl either – the bottom of the unit is solid black plastic with a drain ****. I have already purchased a new filter from CAT – but they said to reuse the black plastic bottom.
Is the C13 a bad engine Truckers report?
Yes, let employers and TruckersReport text me with new opportunities, job alerts and other career information to the number I provided. There is no charge for this service, but standard message and data rates may apply. I’ve got 12 Petes with the same EPA 07 C-13 430 HP/1650 ft/lb.
How to check the oil level in a C13 engine?
1. Check the Engine Oil Level A. Stop the engine. Allow the engine to cool approximately 20 minutes so the oil level can stabilize. B. Check the engine oil level. Result: The engine oil level is OK.Record the engine oil level. Verify that the dipstick is calibrated correctly.
How much Oil can you put in a C13?
I used a 1R-1808 oil filter which is what Cat gave me and it fit fine but was a few inches longer than the Cat one that came off there. I put in nine gallons as a start and let it run, then shut it off and let it sit fifteen minutes. It was right at the full mark maybe a 1/16″ over actually.