What does it mean when the VTM 4 light is on?
When this indicator is on, one or more of your tires is significantly under inflated. You should stop and check your tires as soon as possible. The VTM-4 Lock will temporarily disengage when the vehicle speed exceeds 18 mph (30 km/h). The indicator in the button will remain on.
What does VTM lock mean?
The VTM-4 Lock® feature allows you to manually lock the rear differential in place to get you moving when faced with extreme conditions. By simply pushing the Lock button, you can fully engage four-wheel drive to gain momentum, putting all of your power to the rear axle.
What does it mean when your VTM 4 light comes on Acura MDX?
VTM4 on an Acura MDX stands for Variable Torque Management 4WD System. If Your Mdx has a warning light on for this system You will need to start by scanning Your vehicle codes to see what they say about the fault. The most common cause of this warning light seems to be an EGR valve failure.
What causes the VSA light to come on?
VSA System Indicator Light If the VSA System Indicator lights up and stays on, it means there’s a problem with the system itself. If you see it, pull over when it’s safe to do so, and turn the engine off and then back on. If the light returns, then arrange a service inspection to diagnose the fault.
How do I uninstall VTM 4?
The first way is simply press the VTM4 button that is located on the dash next to the radio. The second way is to shift the drive selector lever to park and then back to drive while You are stopped. The third way is to turn off the vehicle and then turn it back on.
How do you turn off the VTM-4 on a 2004 honda pilot?
To turn off vtm 4 in a honda pilot you will need to hold the button until the light turns off. With car started, press the vtm-4 lock button on the dash. Put foot on break and shift car into drive. Turn car off and put car into park.
What is the VTM on a honda pilot?
VTM (Variable Torque Management)-4r System Senses a traction loss caused by a road condition change, and automatically transfers some power to the rear wheels. Use the VTM-4r LOCK to increase more torque to the rear wheels. 1. Stop your vehicle with the engine running.
How do I uninstall VTM-4?
How do you engage a 4wd Honda Pilot?
Press the VTM-4 button, located to the left of the stereo. An indicator light on the dashboard will light up, showing VTM-4 is active. Press the VTM-4 button a second time to disengage it when you no longer need four-wheel drive.
What is VSA pilot?
Also known as Electronic Stability Control (ESC), VSA helps to stabilize the vehicle during cornering if the vehicle turns more or less than what was intended. It assists in maintaining traction on slippery surfaces by regulating engine output and selectively applying the brakes.
How can I Fix my Acura MDX vtm4 light?
1. Unbolt front of third-row passenger seat. Pop the plastic covers and take out the 2 14mm bolts. 2. Fold seat back 3. Pop off small door on side wall. There’s your box. 4. Pop off both wires/plugs, and unbolt box with 4 12mm bolts.
Does the VTM light work the same way as Check Engine?
Does VTM light works the same way as Check Engine (as i understood), i mean, if there was a problem and it was resolved do i need to clear error to turn off the light or it should turn off automatically? Thanks for the link, i will try to read the codes.
How often does the vtm4 light come on?
I have a 2003 with a VTM4 light that comes on every so often. When this happens it turns into a FWD, and the torque-steer is incredibly dangerous when you least expect it. It was in 3 times for this problem and Acura could not fix it.
Why did my VTM light go out of warranty?
Finally it went out of warranty and they wanted to charge me $900 for a new controller box. The problem was not caused my the infamous EGR valve. There are about 20 things that will trigger the VTM light, and because it is a low voltage system it is prone to errors caused by lazy sensors/connectors.