How do you reset the perform service on a 2008 Dodge Ram 3500?
To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure:
- Turn the ignition switch to the ON position (Do not start engine).
- Press and release the brake pedal two times.
- Fully depress the accelerator pedal slowly two times within 10 seconds.
How do you reset the perform service on a 2008 Dodge Ram 2500?
Press and release the brake pedal two times. Fully depress the accelerator pedal slowly two times within 10 seconds. Turn the ignition switch to the OFF/LOCK position. The message should now be erased.
How do I reset my Dodge computer?
To reset the computer in your RAM 1500, take the following steps:
- Identify your battery’s negative cable.
- Disconnect the negative cable from the battery.
- Wait 20 minutes so that all systems have shut down.
- Reconnect the negative cable.
Is there a 2004 Dodge Ram that will not shift?
This was a major update including an all new frame, suspension, powertrains, interiors, and sheet metal. 2004 Dodge Ram transmission will not shift? I was riding at normal speed and something sounded like a pop, transmission down shifted to 3rd gear, just as if you had changed to tow mode. Rpms went up and trans would not shift, stayed in 3rd gear.
What to do if your Dodge Ram won’t shift into overdrive?
Having the light come on does not necessarily indicate whether the overdrive is indeed functioning as it should, but it is a good first step. You may try turning the overdrive function on and off to try and get the light to function properly. Put the Dodge Ram into drive and drive forward slowly at first, accelerating as you move.
What causes transmission problems in a Dodge Ram?
(Related Article: Transmission Options – DodgeForum.com) One of the most common causes of transmission problems is due to contaminated fluid and low fluid level. When this occurs, solenoids cannot create enough pressure to move fluid throughout the system. The results are hard, erratic shifting or no shifting at all.
What to do if your Dodge Ram has a problem?
Always check your Ram for active and pending trouble codes. These usually save time by isolating the problem to a specific area. Engines codes can affect the transmissions operation, so be sure to record them as well. During a test drive, take note of when the problem occurs.