Where is the dipstick on a Chevy s10?
The Chevy S-10 dipstick can be found on the rear driver’s side of the engine compartment. It will have a ring size handle on it and be in a tube that is coming out of the base of Your engine at the oil pan.
What rear end is in a 91 s10?
the stock rear end is a 28 spline 7.5″ 82-93 have a 26 spline.
How to check manual transmission fluid chevy s10?
Most of the time, the level of a manual transmission is checked by placing your finger into the filler plug hole and seeing if you get some fluid onto the end of your finger. If you don’t, then the fluid is low. If there is fluid at that level, then no additional fluid is needed.
How do I identify my 8.5 gm rear end?
When looking at the housing from the rear, an 8.5 will have two squared off chunks of casting hanging on each side near the bottom of the differential. An 8.2 (shown) will have the same contour as the cover. Most 8.2 factory covers also have the strange protrusion at the top.
How wide is an S 10 rear end?
Finding a good rear end for your project: S10 2WD’s have a drum to drum mounting width of 54.5″ which is perfect for a T-Bucket with larger back wheels. The Blazer and 4WD models have about 4.5-5″ more overall width and works well for 26 and newer fender-less roadsters, and 23 style T’s with narrower rear wheels.
How much HP can a 8.5 rear end handle?
According to this article the factory 8.5 10 bolt is almost as strong as a 12 bolt. Mustang guys build the ford 8.8 for rear ends to handle 1000 -1200 hp in drag mustangs all day long doing mid 8’s in the quarter.
How much horsepower can a GM 7.5/10 bolt handle?
Weak pinion gears. The 7.5 can take about 250 hp with a auto trans and last a good long time.
Are all ford 8.8 rear ends the same?
First appearing in 1977, the 8.8 is found in almost all Ford V8 cars from ’86 on, and in V6 Rangers and Explorers. There are 24 different Fords that offered the 8.8 rear axle. The 31-spline axles (1.29 inches in diameter) are more desirable but far less common.
What kind of Dipstick should I use for automatic transmission?
15687192 Automatic Transmission Dipstick – Natural, Aluminum,… 38023 Transmission Dipstick (Tool) – Replaces OE Number… The automatic transmission dipstick makes it possible to gauge the quantity and quality of the fluid in the transmission system.
Where is the dipstick on a rear wheel drive car?
The automatic transmission dipstick of a rear-wheel drive vehicle is usually on the engine bay’s passenger side. The transmission’s filler tube and its dipstick sit near the engine’s back.
What kind of Dipstick does a Chevy 4L80E use?
TH400, Case Fill, Each Transmission Dipstick, Braided Stainless Steel, Black, Firewall Mount, Chevy, 4L80E, Each Transmission Dipstick, Braided Stainless Steel Housing, Black Handle, GM, TH350, TH400, Each Transmission Dipstick, Locking, Steel, Gold Iridited, Chevy, 4L80E, Each
Why does my transmission dipstick keep blowing out?
Drivers can examine the fluid coating the dipstick’s length or take a whiff for the distinct burned smell of bad fluid. Locking-type dipsticks prevent blowouts caused by excessive pressure in the transmission system. If they’re old or compromised, they may not be able to do this task well.