How long is a Turbo 350 dipstick?
34″
BLACK Steel, OE-Style, GM TH350 (Turbo 350) Transmission Fluid Dipstick With BLACK Steel Tube; 34″ Long Dipstick.
Are TH350 and TH400 dipstick the same?
They are identical. Same length, same markings, same plug, same everything. I guess there is a chance that someone at the factory got it wrong and package them wrong (packaged a 700 dipstick in a th350/400 box).
How long is a 4l80e dipstick?
approximately 28″
The Firewall Mount Dipstick is approximately 28″ in length from the mounting bracket down to the grommet that goes in the transmission. Different lengths are available by special order. This Dipstick can be mounted to the firewall or wherever it is most convenient in the engine compartment.
How many quarts does a Turbo 350 transmission take?
The TH350 takes about 4 quarts in the pan, and then requires additional based on the torque converter being used. When combined with a 9.5” converter, the overall requirement is around 10 quarts. The Turbo 350 transmission, commonly known as the TH350, was a 3 speed automatic transmission that began phasing out the GM Powerglide in 1969.
How big does a transmission dipstick need to be?
From the bottom of the dimple (increased diameter bulge) in the tube which limits the insertion depth into the transmission case, to the end of the stick, is 2-3/8 inch. I think you would need the measurement to the full mark on the stick, not the end of the stick.
What is the weight of a TH350 transmission?
Construction and Size. The TH350 was also known for its quite short length, with an overall length of 21.75”. That also converts into a lighter transmission that carries a weight of 120 pounds. The TH350 takes about 4 quarts in the pan, and then requires additional based on the torque converter being used.
How to figure out proper length of oil dipstick?
The 350 with a stock pan takes 5 quarts of oil including the filter. Ask the engine builder how much oil he put into the motor. I have an NOS Z-28 pan. 7″ sump, 18 1/4″ dipstick.