What kind of transmission fluid does a manual Chevy S10 take?

What kind of transmission fluid does a manual Chevy S10 take?

From owners manual: Manual Transmission a. 5-Speed (2.2L Engine) b. 5-Speed (4.3L Engine) a. DEXRON-IIE Automatic Transmission Fluid (GM Part No.

How much transmission fluid does a Chevy S10 take?

For Automatic Transmission: 4L60-E….AF6

Notes: This specification has been updated from Dexron II or III to Dexron VI per a Technical Service Bulletin from the manufacturer
Capacity: 4 speed 4L60-E Total Fill 11.2 quarts 5 quarts Initial Fill

What transmission is in my 1991 S10?

5 speed transmission 1991 chevy s10.

How do you check the manual transmission fluid in a Chevy s10?

Most of the time, the level of a manual transmission is checked by placing your finger into the filler plug hole and seeing if you get some fluid onto the end of your finger. If you don’t, then the fluid is low. If there is fluid at that level, then no additional fluid is needed.

What transmission does a 2001 s10 have?

5-Speed Manual Transmission .. 4L60-E 4-Speed Electronic Automatic Transmission ………… Four-Wheel-Drive System… Suspension …….

How much transmission fluid does a 99 Chevy s10 take?

How do you put transmission fluid in a Chevy s10?

Raise the S-10 with a floor jack and remove the jack stands from under it. Lower the truck to the ground. Remove the transmission oil dipstick and insert a funnel into the dipstick tube. Pour 5 quarts of new Dexron VI automatic transmission fluid into the dipstick tube.

What transmission is in my 1988 s10?

It was equipped with a 4L60 automatic transmission and a limited-slip differential with 3.42:1 gearing.

What transmission is in a 1988 Chevy s10?

Transmissions and Gas Tanks Only the EL Regular Cab Short Bed 2WD and Extended Cab Short Bed 2WD got a standard five-speed manual transmission with overdrive. The other trims got the four-speed automatic transmission with overdrive.

What kind of transmission does a GMC S15 have?

A 5-speed manual transmission was standard with the 4-cylinder, 2.8-liter V6, and regular 4.3-liter V6. Four-speed overdrive automatic was optional (mandatory with the enhanced 4.3-liter), but not available with the 2.8-liter V6.

What kind of engine does a 1991 Chevy S-10 have?

1991 Chevy S-10 Pickup This smaller pickup featured two engine options, the 2.5-liter, 105-hp I-4 or the 4.3-liter, 160-hp V-6 engine. The C/K 1500 model was available with four engines: a 6.2-liter diesel V8, a 210-horsepower 5.7-liter V8, a 175-horsepower 5.0-liter V8 or a 160-horsepower 4.3-liter V6.

What kind of fluid does a Chevy truck use?

Information about type and capacity fluid are for reference only. Reference book «Fluid type : automatic transmission Chevy Trucks and Vans». Full capacity l. Service fill l.

What kind of fluid does a GMC 83 use?

On all manual transmissions except the 4 speed with overdrive, use SAE 80W-90 GL-5 gear lubricant or SAE 80W GL-5 in colder climates. I bought this 83 used about two years ago. I think the fluid has never been changed, and the fluid level seems to be low. So, I thought I might as well change the fluid.

What kind of transmission fluid does a manual Chevy s10 take?

What kind of transmission fluid does a manual Chevy s10 take?

From owners manual: Manual Transmission a. 5-Speed (2.2L Engine) b. 5-Speed (4.3L Engine) a. DEXRON-IIE Automatic Transmission Fluid (GM Part No.

What weight is manual transmission fluid?

SAE (Society of Automotive Engineers) weight is the viscosity of the oil, basically how thick it is. You’ll usually see something like SAE 20W50 — the W is for winter, because oils are thicker when they’re cooler. So in this case, the manual transmission fluid has a summer weight of 20 and a winter weight of 50.

What kind of fluid does a NV3500 take?

Correct, the NV3500 and NV5600 both use a 5w30 weight gear oil, not an 80w90 gear oil. In simpler terms use either Pennzoil Syncromesh, Redline MTL (not MT-90), or Amsoil MTF (manual transmission fluid)…these are all “correct” fluids for the NV5600 and the NV3500.

How many quarts does a NV3500 take?

Engine Oil

Viscosity: 0W-20 (All TEMPS)
Capacity: 6.9 quarts (with filter)After refill check oil level.
Torque: 25 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt.

How much power can a NV3500 handle?

NV3500 MG5 has a input torque of 300ft-lbs. with my stock 350 pulling 212hp @4000 and 300ft-lbs @2800 I have had two fail and one of those went out leaving me with only 4th gear. I swapped it with a NV4500 MW3 2004 model. NV4500 can handle 475ft-lbs.

What kind of lubricant do you use for transmission fluid?

A thermally stable, extreme-pressure gear lubricant, it is designed to operate and protect in both high and low extreme temperature conditions. • Specially recommended for limited-slip hypoid differentials and is compatible with conventional gear lubricants.

When to use Valvoline Dex / Merc transmission fluid?

Valvoline DEX/MERC • Recommended for vehicles manufactured by General Motors & Ford, 2005 and earlier • Recommended for many imports, 2005 and earlier, including select Toyota and Mazda • Recommended for use where DEXRON®-III/MERCON Transmission fluid is required Part# VV353 Ford: Valvoline ATF Recommended for MERCON®V Applications

What kind of lubricant is synpower 75W90 gear oil?

SynPower 75w90 Gear Oil: Valvoline SynPower Full Synthetic Gear Oil • Formulated for ultimate protection and performance. A thermally stable, extreme-pressure gear lubricant, it is designed to operate and protect in both high and low extreme temperature conditions.