What does do not pass within the feet of a railroad crossing?
Whenever a person driving a vehicle approaches a railroad crossing and there is a signal indicating an approaching train, the driver must stop within 50 feet, but not less than 15 feet, from the nearest rail of the railroad and must not proceed until he or she can do so safely.
What is the maximum speed you would drive if you could only see 400 feet ahead?
15 mph
You are approaching a railroad crossing with no warning devices and are unable to see 400 feet down the tracks in one direction. The speed limit is: A. 15 mph.
How much distance does it take to react to something you see and bring your vehicle to a stop if you are traveling 30 mph?
If you have good tires and brakes, and the road is dry: at 50 mph, it can take about 400 feet to react to something you see and to bring your vehicle to a stop. That is about the length of a city block. at 30 mph, it can take about 200 feet to stop.
What should the minimum amount of room on the other side of the railroad tracks at a crossing be in order for you to cross it?
Before you pull onto the track, make sure there is enough room on the other side for the back of your vehicle (and any overhanging cargo) to be at least 6 feet beyond the furthest rail.
What should drivers do when the vehicle behind forgets to lower their high beams?
If the person behind you has high beams on by mistake, this will generally work, but if they’re a raged driver who is out to get everyone, then rather let them pass you by slowing and driving slightly to the side. Turn your rear fog lights on and off until the person behind you turns off their high beams.
How long will it take you to pass a truck at 60 mph with oncoming traffic?
Traffic laws are instituted to protect you. As you examine these rules, you may wish to consider this fact: At 60 mph, a driver will travel 132 feet in 1.5 seconds (60 mph is 1 mile per minute, or 88 ft.
Can you cross railroad tracks faster than 400 feet?
If during the last 100 feet of approaching a railroad crossing, you cannot see the track for at least 400 feet in both directions, you may not cross the tracks at a speed faster than _____ MPH. When passing a trolley, you must pass from what side? A diamond symbol painted on a lane, indicates what?
What’s the speed limit at a railroad crossing?
The speed limit is 15 mph within 100 feet of a railroad crossing where you cannot see the tracks for 400 feet in both directions. You may drive faster than 15 mph if the crossing is controlled by gates, a warning signal, or a flagman. At railroad or train crossings: Look in both directions and listen for trains.
Are there yellow crosswalk lines at school crossings?
Yellow crosswalk lines may be painted at school crossings. Some crosswalks have flashing lights to warn you that pedestrians may be crossing. Look for pedestrians and be prepared to stop, whether or not the lights are flashing.
Do you have to obey the stop line before a crosswalk?
If there is a stop line before the crosswalk, the stop line must be obeyed first. Pedestrians have the right-of-way in marked or unmarked crosswalks.