How do you adjust the headlights on a Toyota Tacoma?
Disconnect the wiring harness from one of the headlights, then turn on the headlights. Turn the vertical adjustment screw counterclockwise to move the headlight beam down, or clockwise to raise the beam. The very top of the headlight beam should be within the four corresponding squares you drew on the wall.
How do you adjust the headlights on a 2017 Tacoma?
Adjust the headlight aim into the specified range by turning aiming screw A with a screwdriver. NOTICE: The final turn of the aiming screw should be made in the clockwise direction. If the screw is tightened excessively, loosen it and then retighten it, so that the final turn of the screw is in the clockwise direction.
Move back 25 feet. Measure 25 feet from the wall and mark the concrete. Back up, while keeping the wheels straight, until the tip of your Tacoma’s front bumper is right at the mark you made on the concrete — now you can start making your adjustments.
Where are the adjusters on a Toyota Tacoma?
Find the adjusters. Identify the adjustment screws or gears on the back of the headlight assemblies. If you are looking directly at the back of the headlight assembly, the vertical adjustment screw is at 8 o’clock position on the driver-side headlight and 4 o’clock position on the passenger headlight.
Where is the horizontal adjustment screw on a Toyota Tacoma?
The Horizontal adjustment screw is at 11 o’clock on the driver-side headlight and 1 o’clock on the passenger headlight. Some Tacomas have a 4mm bolt for the horizontal and vertical adjustment screws, while others have a small gear that you turn with a Phillips screwdriver. The screws may be covered with small rubber caps.
How do you put a headlight on a car?
Disconnect the wiring harness from one of the headlights, then turn on the headlights. Turn the vertical adjustment screw counterclockwise to move the headlight beam down, or clockwise to raise the beam. The very top of the headlight beam should be within the four corresponding squares you drew on the wall.