Are AC parts interchangeable?
Using different brands of units — often called a “mismatched system” — usually has no major short-term consequences as long as the coils, blower and wiring used are compatible and properly sized.
Are AC compressors interchangeable?
As much as compressors are basically interchangeable, there are design configurations and a one time adjustment to make an R12 compressor a little more tuned for R134a. Only one adjustment is allowed while R134a compressors remain fixed in design.
Can you mount a Sanden compressor upside down?
This is definate No. The discharge line is always to remain up to the 4 bolt flange. You never want the disharge line to point in a downward position. The bottom of the compressor does act like a oil sump.
How do I identify a Sanden compressor?
A: Look at the label on the compressor. The Sanden part number is listed under “Model Number” on the label. The part number is a 4 digit number.
Can you mix and match AC units?
For a split system, use matching equipment from the same manufacturer. Do not mix and match. Yes, technically, you might be able to get them to work, but it’s an absolutely terrible idea for a lot of reasons. Just don’t do it!
Can I install a different brand of AC indoor and outdoor unit?
Different brand equipment can almost always work fine. However, because manufacturers design their components to work optimally together, the potential exists for some loss in efficiency when mixing and matching. Keep in mind, you are also combining systems that are different ages as well.
Are all AC compressor the same?
While all AC compressors have the same job, they work in varying ways and offer different pros and cons.
How do I find my AC compressor model number?
Look at the model number (Located on the data plate stamped on the actual side of the compressor) on the compressor and there should be a number divisible by 12. It should start at 18 and not be more than 60 for residential AC units.
How do I know my car compressor?
Connect a pressure gauge to the low side of the AC compressor, typically found on the firewall passenger side in the engine compartment. Add approximately 2 oz. of Freon to determine whether the compressor kicks on (if it does, you will hear a loud click followed by a puttering sound).
Can I replace just the outside portion of my AC?
Often, a technician will recommend that you replace both the inside and outside portions of the air conditioner, but there are some exceptions to this. For example, if the air conditioner is relatively new and under warranty, your manufacturer may provide you with a new completely compatible unit at little or no cost.
Is AC outdoor unit waterproof?
The outdoor portion of an A/C system is built to withstand the rain, and even severe rainfall will not damage it. The answer is: Yes, you can use these systems, even during heavy rain. Keep your systems in good working order and the rain will not damage them.
Where can I find old air compressor brackets?
Old Air Products40-7289L3 – Compressor Mount | Ford 289 V8, Includes Pulley, Drivers Side SHOW DETAILS Compare QUICK VIEW Old Air Products40-119L – Compressor Mount | Chevy SB, Long WP, Drivers Wide Mount SHOW DETAILS Compare QUICK VIEW Old Air Products40-4218 – Compressor Mount | Chevrolet R-4 to Sanden Adapter SHOW DETAILS Compare QUICK VIEW
What kind of brackets do you need for an air conditioner?
Select your preferred location and we’ll note which parts are ready to be picked up TODAY. Air Conditioner Brackets, A/C Compressor Brackets, Sanden 508, Billet Aluminum, Natural, Tensioner Pulley, Compressor Bracket, Chevy, LS, Kit
What kind of air conditioner bracket does an Oldsmobile use?
A/C Bracket, Sanden 508, Steel, Natural, for Factory Air Oldsmobiles with Passenger Side Compressor, V8, Each Compressor Relocation bracket, GM Truck, LS, 4.8, 5.3, 6.0 Liter, OEM Compressor, Each
What kind of air brackets do I need for a 1964 Ford?
Ford 292-312 Inch Y-Block V8 T-Bird only Compressor Mounting Bracket. For 507 compressor use VA #04807-VUA. Simple and economical solutions to get your Ford-powered classic air conditioned with ease. Ford 289 302 V8 1964-68 with idler pulley Compressor and Alternator Mount Bracket (requires three groove crank pulley).