What are the possible causes of a p0741 code?
P0741 Possible Causes 1 Low transmission fluid level 2 Dirty transmission fluid 3 Faulty torque converter clutch solenoid valve 4 Torque converter clutch solenoid valve harness or connectors 5 Torque converter clutch solenoid valve circuit is open or shorted 6 Transmission internal mechanical problem
What does p0741 mean on a torque converter?
P0741 Meaning The torque converter clutch solenoid valve is activated, with the gear in D4, by the Transmission Control Module (TCM) in response to signals sent from the vehicle speed and the Engine Control Module (ECM). Lock-up piston operation will then be controlled.
What does it mean when a car has a po420 code?
When your vehicle generates those emission codes it simply means that the converter is not able to function properly. Remember that the catalytic converter is at the very end of the emission diagnostic system, and a number of things can go wrong upstream of the converter that can cause. a PO420 (or PO430) MIL light illumination.
How long is a po752 subscription good for?
More than 7 days of PO752 history is available with an upgrade to a Silver (90 days), Gold (1 year), or Business (3 years) subscription.
P0741 Possible Causes 1 Low transmission fluid level 2 Dirty transmission fluid 3 Faulty torque converter clutch solenoid valve 4 Torque converter clutch solenoid valve harness or connectors 5 Torque converter clutch solenoid valve circuit is open or shorted 6 Transmission internal mechanical problem
P0741 is a diagnostic trouble code (DTC) for “Torque Converter Clutch Circuit Performance or Stuck Off”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
What are the symptoms of a p0741 solenoid?
Some possible symptoms could include the following- 1 Excessive transmission slippage under hard acceleration. 2 Transmission overheating. 3 Harsh shifting. 4 Increased fuel consumption. 5 Depending on the application, other transmission or torque converter clutch codes may be present along with P0741.
P0741 is a diagnostic trouble code (DTC) for “Torque Converter Clutch Circuit Performance or Stuck Off”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
Some possible symptoms could include the following- 1 Excessive transmission slippage under hard acceleration. 2 Transmission overheating. 3 Harsh shifting. 4 Increased fuel consumption. 5 Depending on the application, other transmission or torque converter clutch codes may be present along with P0741.
How much does it cost to diagnose Ford code p0741?
What does this mean? The cost of diagnosing the P0741 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P0741 FORD code detected?
Where do I find the trouble code on my Pontiac?
These are listed in numerical order for easy searching. When retrieving Pontiac trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.
What is Pontiac check engine light code p1115?
P1114Engine Coolant Temperature (ECT) Sensor Circuit Intermittent Low Voltage – Read Our Article on Automotive Circuit TestingFor Help With This Pontiac Trouble Code P1115Engine Coolant Temperature (ECT) Sensor Circuit Intermittent High Voltage – Read Our Article on Automotive Circuit TestingFor Help With This Pontiac Check Engine Light Code