What happens when a mechanical fuel pump fails?
A leak in the diaphragm or one-way valve inside a mechanical fuel pump will cause a loss of fuel pressure and starve the carburetor for fuel. This may cause the engine to run lean, misfire, hesitate or stall. If the pump fails entirely, no fuel will be delivered to the carburetor and the engine will not start or run.
How does a car act when the mechanical fuel pump is going out?
You’ll notice a decrease in fuel efficiency, acceleration and power in your vehicle if your fuel pump is damaged. The low pressure caused by a faulty fuel pump means your engine isn’t getting the fuel and air mixture it needs to give your car that regular power. Whining in the backseat.
How do you troubleshoot a mechanical fuel pump?
Crank the engine and watch how the fuel flows from the line. If you see steady, strong spurts, then the pump works. If you see a weak stream or nothing at all, then you could have a failed pump, a blocked fuel line, a clogged fuel filter, or an empty gas tank. Check the fuel pump pressure.
What happens when the fuel pump goes out in a Toyota Corolla?
There are physical signs that you can feel when your Corolla’s fuel pump is going out. Before taking anything apart, check to see if your engine’s computer has any trouble codes saved in it. The engine may throw a P0087 trouble code. This trouble code detects that the fuel rail/system pressure is too low.
What does a bad fuel pump sound like?
A priming fuel pump sounds like a high-pitched whine for a few seconds and can be heard with a sharp engine right after the ignition key is turned, but before the starter is engaged. The symptoms of a bad fuel pump match a lot of other common problems that can occur in the Toyota Corolla.
Where is the fuel pump located in a car?
Unlike many larger vehicles, you won’t have to remove the fuel tank itself if you need to replace the pump. The fuel pump module is accessible from inside the car itself underneath the rear seats. Use extreme caution when working on any part of the fuel system because of its high pressure.
Why is the fuel pump in the fuel tank?
It is in the fuel tank because “pushing” fuel to the fuel rail is easier than “pulling” the fuel, which is what an inline pump would do. While being in the fuel tank makes the pump more reliable, it also makes it a lot more difficult to get to. The good news is that fuel pumps are inexpensive.