How do I reset my oil change indicator?
Hold the Reset Button and Turn the Key Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
Why won’t my change oil light go off after oil change?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.
How long can you go with the oil change light on?
On vehicles with an oil change light, an oil change is needed when the light remains on after startup. It’s best to schedule the oil change within one to two weeks. If you primarily do highway driving, you have a little more breathing room than city driving.
Why is my engine light on after oil change?
Most likely, however, it is the oil sending unit. These often start leaking oil internally into the sending unit, which then gets oil in the plug in wiring harness, which causes the light to come on (or gauge to fail). These are relatively easy to check and/or replace on many vehicles.
How do you reset the oil change light on a Toyota Highlander?
Like many other Toyota vehicles, the process to reset the oil change (Maintenance Required) light on the Toyota Highlander is much the same. Follow these steps to reset the indicator light. With the vehicle running, press and hold the “Trip” button or display change button to switch the display to “Trip A“. Turn the vehicle completely off.
How to reset Toyota Highlander service maintenance indicator?
2008-2013 Highlander Maintenance Required Soon Reset STEP 1. Turn the Ignition ON. Don’t start the Engine. STEP 2. Press the ODO/TRIP BUTTON to display to TRIP A. STEP 3. Press and hold ODO/TRIP BUTTON and turn ignition to the “RUN” position. Hold knob for at least 5 seconds until “RESETTING MAINTENANCE DATA COMPLETED” is displayed. STEP 4
How to reset the oil maintenance required light?
Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota Highlander: If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal Continue to hold down the ODOMETER/TRIP button until “000000” MILES appears on the display and the maintenance light turns off. Done!
How do you reset the odometer on a Toyota Highlander?
If your car has START push-button, press the “Start” without touching the brake pedal. Press the odometer button until you see “ODO” (for 2006-2012 models) or “TRIP A” (for 2013-2018 models) Next, turn the ignition “off”. Press and hold the Trip Odometer Reset button, and turn the ignition switch to the “On” position.