What is leaking from my car driver side?
Leaks can come from the overflow tank, the radiator, the water pump, coolant hoses and elsewhere. For your own safety, wait until your engine is cold before opening the radiator cap. Check the brake fluid level in the reservoir (usually near the firewall on the driver’s side) and see if you can see any leaks there.
Can oil leak from the drive shaft?
If you’re concerned that your axle seal might be leaking, here are a few things to look out for: Oil drops below your vehicle after it has been parked. If you start to notice oil drops on your driveway, it could be a sign of a leaking axle seal. Transmission starts slipping as you are driving on the highway.
What happens if you have an oil leak in your car?
If you must drive a car with an oil leak, you will need to check your oil frequently, and you will need to be the judge of how bad it’s leaking and how often it will need to be topped off. Oil leaking from an engine can cause a huge mess wherever you park and permanently damage asphalt surfaces,…
Where is the oil leak on a 272 / 273 Mercedes?
272/273 Engines: The most likely rear engine leaks include the oil separator and the cam plugs ( 30mm and 65mm ). The oil separator is held onto the back of bank 1 (passenger side) with either 4 torx bolts or 4 external torx bolts. Remove the oil separator, replace, and clean the oil residue from the engine.
What kind of engine is susceptible to oil leaks?
To identify which engines are susceptible to certain oil leaks, refer to this list: M112 – V6 that ranged from 1997-2005, used in C-Class, CLK , E-Class, SLK, Chrysler Crossfire M113 – V8 used from 1997-2005, used in E-Class, ML, S-Class, G-Wagen, CLS M272 – V6 used from 2004-2011, C-Class, E-Class, SLK, CLK, R-Class, Sprinter, GLK
What to do if your Mercedes Benz oil filter is leaking?
The process of replacing these gasket is super easy: Remove oil filter housing nut with a 46mm socket. Reinstall parts, replace oil filter, and oil. If your timing cover plug is leaking, it’s likely due to a bad seal. Luckily, replacement could not be easier: