Should you replace coils with struts?
It’s not necessary, but it’s usually recommended to replace them in pairs, for example, both front struts or both rear shocks. Do coil springs need to be changed when replacing the struts? The answer is no: if the spring is in a good shape, it can be re-used with the new strut.
How often should strut springs be replaced?
Depending on vehicle and driving conditions, many cars require shock and strut replacements sometime after the fifty thousand mile marker. Instead of waiting to notice problems, you might consider having your suspension checked once you reach the fifty thousand mile mark, or every fifty thousand miles on most vehicles.
How do I know if my coil springs are worn out?
Here are a few symptoms that will let you know if your coil springs have worn out.
- Sharp Vehicle Sagging.
- Unusual Tire Wear.
- Unsettling Noise.
- Harsh Vehicle Bounce.
- Abrupt Vehicle Sway.
How much does it cost to install front struts?
Strut Replacement Cost On average, expect to pay somewhere between $450 and $900 to replace a pair of struts. An individual strut assembly will cost about $150 to $300 so you’re looking at around $300 to $600 for parts alone. Labor alone will set you back about $150 to $300 for the pair.
How to replace your own shocks and struts?
How to replace shocks and struts 1. Check whether you need a spring compressor. On many cars, the struts/shocks and springs are interrelated or… 2. Securely raise one side of the car. If you’ve got access to an actual lift, great. Driveway DIYers everywhere are… 3. Remove the wheel and extract
How do you install a new strut on a car?
Installing a New Strut Install the completed strut assembly back into the steering knuckle. Replace the bolts, leaving them finger tight, allowing the assembly to move freely. Place the strut assembly back into the strut tower and replace the strut tower bolts.
Do you need a compressor to replace struts?
On many cars, the struts/shocks and springs are interrelated or integrated, which means you may need a spring compressor to remove the springs.
How do you remove a strut from a spring?
Remove the large nut on top of the strut with ratchet and socket combination, and hold the strut rod with a wrench just below the strut bearing. Make a note of the strut top plate rotation before removal and reinstall in the same position. The strut can now be removed from the spring while the spring is still compressed by the spring compressor.