What does the maint reqd light mean on a Toyota Prius?
The maint reqd light means that Toyota recommends servicing your Prius soon. Depending on what the vehicle mileage is when the light came on, it could mean that any of the following maintenance is needed:
How do you reset the oil on a Toyota Prius?
First Clear the System message by pressing the BACK Button on Driver Info Button. image for reference only. Then Press the Right Arrow to navigate SETTINGS (Gear Icon). Now select MAINTENANCE SYSTEM > Oil maintenance > then Select YES to reset the OIL MAINTENANCE. Reset Complete Message appear. Turn the Power Off. Oil Maintenance reset is complete.
How to turn off the Toyota maint reqd light?
Press and hold the odometer button. Turn the key to the off position while still holding the odometer button. Without releasing the odometer button, turn the key to the run position. Wait a few seconds for the light to turn off.
How to turn off Odo reading on Toyota Prius?
1 Press the Power button twice (2X) with your foot off of the brake. 2 Using the ODO button below the multi-function display, press to cycle through and stop on the ODO reading rather than on Trip A or Trip B. 3 Press the Power button once to power your Prius down.
How to reset the maintenance required light on a 2004-2009?
Press the ODO/TRIP button under the display in the center of the dash until odometer reads the mileage (not Trip A or Trip B) 3. Turn the power to the “OFF” position by pressing the power button once while *not* stepping on the brake pedal.
How do I reset the maintenance light on my Toyota 4Runner?
Nearly every make and model year of Toyota vehicle has the same process to reset the maintenance required light. Turn the key to the on position with the odometer showing. Press and hold the odometer button. Turn the key to the off position while still holding the odometer button.
How do you Turn Off Accessory mode on a Toyota Prius?
Push the START BUTTON, don’t start the ENGINE (Accessory Mode Only) Press the TRIP button, to display TRIP A on the Driver Information Display. Then Turn The IGNITION To OFF. Now Press the KMH/MPH Button, then Push the START button twice to enable ACCESSORY MODE.