What does a blinking maintenance light mean?
It’s basically just telling you that your car will need some kind of scheduled service soon. It could be an oil change, a tuneup, or maybe you need a new timing belt. When the light begins to flash at startup, you have about 500 miles or so to go before the next scheduled service.
How do you reset the maintenance light on a Toyota RAV4?
Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Continue holding the odometer button for 10 seconds. The light should then flash, possibly beep, and then go out. Once off, release the odometer button and start the car.
When to reset the Toyota RAV4 maintenance required light?
In many cases, after maintenance is performed, the light will reset, but in the event that it does not, it is important to know how to reset the Toyota RAV4 Maintenance Required Light. Learn how with this step-by-step guide!
What does the maint reqd light mean on a Toyota?
If you hook a code scanner to the OBD2 port, you will get a trouble code that lets you know which sensor has sent triggered the check engine light. With the maint reqd light, there is no trouble code. It is letting you know that Toyota is recommending that the vehicle come in for maintenance and inspection to keep from having problems.
How to turn off maint reqd light on Toyota 4Runner?
1 Turn the key to the on position with the odometer showing. 2 Press and hold the odometer button. 3 Turn the key to the off position while still holding the odometer button. 4 Without releasing the odometer button, turn the key to the run position. 5 Wait a few seconds for the light to turn off.
What does the Check Engine light mean on a Toyota?
The check engine light is there to let you know that there is a known problem . If you hook a code scanner to the OBD2 port, you will get a trouble code that lets you know which sensor has sent triggered the check engine light. With the maint reqd light, there is no trouble code.