How do you reset the maintenance light on a Toyota Land Cruiser?
Light Reset Instructions: Press and hold the trip meter reset nob (next to your Toyota Land Cruiser’s odometer). While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota Land Cruiser. Hold the meter reset until the MAINT REQD light switches off.
How do you reset the maintenance light on a 2003 Land Cruiser?
2003-2008
- With vehicle ignition switched to ON position, make sure odometer reading is shown, then turn the ignition switch to OFF position.
- While holding reset button, switch ignition to ON position.
- Continue to hold the reset button until the odometer displays “000000” and/or the MAINT REQD light goes off.
How do I reset the service reminder on a 200 series Landcruiser?
Hold and Press the ODO/TRIP button then turn the ignition to On. Don’t release the ODO/TRIP BUTTON until the MAINT REQD warning light flashes multiple time and the light will disappear.
How do I reset my Toyota maintenance code?
Resetting the Toyota maintenance required light is fairly easy. First, turn your vehicle on and make sure the odometer is displaying miles and not a trip meter. Then, turn your vehicle off and press and hold the trip meter reset button.
How long does it take to change the oil on a Toyota Land Cruiser?
Time needed: 7 minutes. When engine oil needs to replace, the MAINT REQD message will appear on the display. The engine oil maintenance data must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota Land Cruiser:
How to reset the maintenance reqd light on a Toyota Land Cruiser?
To reset the maintenance reqd light on Toyota Land Cruiser, conform to the following instructions: Turn the ignition key to position “ON” (II) without starting the engine, If your vehicle has a Smart key button, press the “Start” button twice without touching the brake pedal. This tutorial we got from the Toyota owner’s manual.
How to reset service engine oil maintenance data?
How to reset service engine oil maintenance data Toyota Land Cruiser J200 series. The oil change system should be reset. Switch the display to the trip meter A when the engine is running. Turn the “ENGINE START STOP” switch OFF.
When to reset maintenance light Toyota after an oil change?
The computer system starts tracking the mileage after every reset and the light will come on after you drive 5,000 miles. The light comes on after 5,000 miles. (Photo Source: nairaland) When you change the oil or have the vehicle serviced, you will need to turn off maintenance light Toyota so that it can again start counting for 5,000 miles.