How much oil does a 200 Series LandCruiser?
A full oil and oil filter change in the LandCruiser 200 requires 9.2 litres, so I recommend buying oil in at least 10 litre drums for the best value.
What oil for Toyota Land Cruiser?
Motor oil Helix Ultra AP-L 5W-30 fully complies with the specification for the Land Cruiser 200 V8 4.5 D4D (1VD-FTV) (DT) (2007-) and is the ideal lubricant for this car TOYOTA.
How much oil does a Land cruiser take?
The Toyota Land Cruiser with a 4.7L 4-cyl engine (engine code 2UZ-FE) takes 7.2 quarts (with filter) of 5W-30 synthetic oil. A new oil filter and a crush washer are required.
How much oil does a 100 series LandCruiser take?
Model: Toyota Land Cruiser 100, J10 (1998 – 2007)
| Engine | Capacity/Filter capacity litres(liters) | |
|---|---|---|
| Land Cruiser 100 4.7 V8 32V (2004 – 2005) | 2UZ-FE | 6.8 / 0.4 |
| Land Cruiser 100 4.7 V8 32V (2005 – 2007) | 2UZ-FE | 6.8 / 0.4 |
| Land Cruiser 100 4.2 D (1998 – 2003) | 1HZ | 9.3 / 1.3 |
| Land Cruiser 100 4.2 D (2003 – 2007) | 1HZ | 9.3 / 1.3 |
What kind of oil does a 79 Landcruiser take?
Toyota reccomemded engine oil viscosity is 0w-30 preferred but does offer a 5w-30 option as per the attached photo from the owners manual.
How do you change the oil in a Toyota Land Cruiser?
For most Toyotas, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Toyota Land Cruiser oil filter wrench.
What kind of oil filter do I need for a landcruiser?
A quality oil filter, such as Toyota, Ryco or Baldwin. A new washer for the sump plug, part number 90430-12031. A large oil drain pan. eg: 13L, 15L or 17L. A 64.5mm/14 flute Toyota oil filter removal tool. Depending on your budget, a cheaper generic version, or higher quality SP Tools or Omik.
How much oil does a landcruiser 200 need?
A full oil and oil filter change in the LandCruiser 200 requires 9.2 litres, so I recommend buying oil in at least 10 litre drums for the best value.
What kind of air filter does the Landcruiser 200 use?
To drive accessories such as the alternator, water pump and air conditioning compressor, the 200 uses a single “serpentine” type belt. It’s certainly worth taking a spare with you on outback trips. Part numbers are: The LandCruiser 200 uses a flat panel air filter.