How to reset the maintenance light on a Toyota Sienna?
After some investigation at ToyotaNation.com, I discovered the answer… With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B). Turn the car off (ignition key to the OFF position). Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
Is it OK to turn off Toyota maintenance light?
The Toyota maintenance light doesn’t go away on its own, so it’s a good idea to turn it off by yourself to have one less distraction in your dashboard. As you drive around the city, this light can become annoying and might even make you think that there is something wrong with your car.
How do you reset the maintenance light on a Toyota RAV4?
If your car has START push-button, press the “Start” twice without touching the brake pedal. Continue to hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off. This tutorial we got from Toyota owner’s manual.
How to turn off the ” maint reqd ” light?
Turning Off “MAINT REQD” Light Toyota Sienna, Corolla, etc. – The MAINT REQD light goes on (first blinking, then persistent) to indicate it’s time to change the engine oil. However, after changing the engine oil, the light stays on. I thought the act of changing the oil was enough to reset the warning, but not so.
When does the reqd light come on in a 2006 Sienna?
Sometimes, after changing the oil in your 2006 Sienna, you may notice that the MAIN REQD light is still on. The light, which indicates when you need an oil change, typically comes on approximately every 5,000 to 7,500 miles. To turn the light off, you need to reset it by following a few easy steps. Step 1
How to reset the ” maint reqd ” light-Toyota?
Release the odometer button/knob . Turn key to OFF position . That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so. Is High Octane Gas Worth the Money?
How to turn off maintenance light on Toyota Tundra?
If your car has START push-button, press the “Start” twice without touching the brake pedal. Continue to hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.