How much does it cost to repair a P1346 Toyota?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1346 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
What are the causes of P1346 Toyota variable valve timing sensor bank?
P1346 TOYOTA Possible Causes 1 Faulty Variable Valve Timing (VVT) Sensor 2 Variable Valve Timing (VVT) Sensor harness is open or shorted 3 Variable Valve Timing (VVT) Sensor circuit poor electrical connection 4 Engine Control Module (ECM) More
What does the OBD code p1349 stand for?
P1349 Code – General. OBD-II code P1349 indicates a problem with the variable valve timing system in your Toyota. Your Toyota’s variable valve timing, or VVT, system is responsible for controlling and adjusting the intake valve timing according to driving conditions. The engine control module, or ECM, controls the oil control valve, or OCV,…
What does the code p1349 mean on a VVT controller?
P1349 Code – General. From there, the VVT controller changes position between the cam and crankshaft. The code, P1349 is triggered when the valve timing isn’t changing from the current valve timing state, or when the valve timing is fixed.
How does an air conditioner work in a Toyota Avalon?
1. A/C solar sensor 2. Harness or connector between A/C solar sensor and A/C amplifier 3. A/C amplifier 1. A/C lock sensor (w/ magnet clutch compressor assembly) 2. Compressor drive belt 3. Harness or connector between A/C amplifier and ECM 4. Harness or connector between A/C lock sensor (w/ magnet clutch compressor assembly) and A/C amplifier 6.
What to do when ABS warning light goes off in Toyota Avalon?
Yaw rate and acceleration sensor power source circuit (a) Drive the vehicle at 12 mph (20 km/h) for 30 seconds or more and check that the ABS warning light goes off. (a)Keep the vehicle in the stationary condition for 5 seconds or more and depress the brake pedal lightly 2 or 3 times.