How can I Fix my Honda Fit blower?
The unit is really easy to remove, just remove the glove box. Once it is out if you bang it on a hard surface a bunch of black dirt will come out of it. Either replace the blower or just clean it out with WD-40, then apply grease to the moving parts.
Why does my Honda Fit fan only work on high speed?
AC Fan only works on High Speed. New development:Have the same problem wit my Honda FIT 2011, a/c blower works three or four days then it quits, I leave it on and eventually it comes back on.Will wait for it to break down permanently , then I’ll fix it. Intermittent electrical problems bring out the magician trial and error troubleshooting.
Why is my Honda Fit air conditioner not working?
Share it! The Honda Fit, among other models, may have issues with one or more fan speeds for the heater or air conditioner failing to function. While this may be associated with the switch used to select the fan speed, it is most likely due to a failed blower motor resistor.
How much does it cost to fix a Honda Fit fan?
The fan had not been making any noises or having any other problems. I had the same issue. The Honda dealer verified that a service bulletin was issued and the recommended repair is to replace the blower fan and the resistor. I’m not a DIY’er so I had them do it to the tune of $466.99 (Parts, labor and tax).
How much does it cost to replace blower on Honda Fit?
The average cost for a Honda Fit blower motor replacement alone is between $428 and $450. After about 2 khr (50 kmi) of service, my blower resistor and motor worked only on speed four like everyone else (see also TSB 09-097).
AC Fan only works on High Speed. New development:Have the same problem wit my Honda FIT 2011, a/c blower works three or four days then it quits, I leave it on and eventually it comes back on.Will wait for it to break down permanently , then I’ll fix it. Intermittent electrical problems bring out the magician trial and error troubleshooting.
Share it! The Honda Fit, among other models, may have issues with one or more fan speeds for the heater or air conditioner failing to function. While this may be associated with the switch used to select the fan speed, it is most likely due to a failed blower motor resistor.
The fan had not been making any noises or having any other problems. I had the same issue. The Honda dealer verified that a service bulletin was issued and the recommended repair is to replace the blower fan and the resistor. I’m not a DIY’er so I had them do it to the tune of $466.99 (Parts, labor and tax).
The unit is really easy to remove, just remove the glove box. Once it is out if you bang it on a hard surface a bunch of black dirt will come out of it. Either replace the blower or just clean it out with WD-40, then apply grease to the moving parts.
What to do if your Honda Fit fan stops working?
I have a 2010 Honda FIT. The fan for the A/C and Heater just stopped working on all speeds except High. The fan had not been making any noises or having any other problems. I had the same issue. The Honda dealer verified that a service bulletin was issued and the recommended repair is to replace the blower fan and the resistor.
How do you remove motor from Honda Fit?
You can take the motor out of the plastic housing by removing one screw. Remove the blower from the motor as well. You will then need something to squeeze the fingers that are spread which holds one end of the motor end plate with bushing on. I took the end off opposite from where the brushes are located.
Why does my Honda Fit have no air?
In most instances, one or two speed selections will result in non-operation of the fan, and no air from the vents. However, it is also likely that the only speed that functions is the highest fan speed.