How to fix P0136 code?
What repairs can fix the P0136 code?
- Replacing the O2 sensor for bank 1 sensor 2.
- Repairing or replacing the wiring or connection to the O2 sensor for bank 1 sensor 2.
- Repairing exhaust leaks or a damaged catalyst.
What does code P0037 mean?
What the P0037 code means. P0037 indicates that, for the engine to run correctly, the exhaust must have a specific air fuel ratio of 14.7 to 1 as determined by the Heated oxygen sensors (HO2S), which detects the oxygen content of the vehicle exhaust.
Can I drive with P0037?
The vehicle can still be driven, but it should be properly diagnosed as soon as possible to prevent more issues like sensor loop errors, high fuel consumption, poor operation, or damage to other components.
What does p0137 mean on an engine control module?
Coming back to P0137, this code is generated when the engine control module (ECM) detects that the O2 oxygen sensor for bank 1 voltage has stayed below 400 millivolts (0.21 volts) for more than twenty seconds. Another reason for this code to trigger is that the air/fuel ratio sensor remains lean mode for over 2 minutes.
What do I need to know about the p0037 code?
Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. HO2S Heater Control Circuit Low Bank 1 Sensor 2 is the generic definition for the P0037; however, your vehicle’s manufacturer may have a different definition and information for the P0037 code.
What causes the p0138 code on an engine?
What causes the P0138 code? 1 The engine control module (ECM) sees the voltage of the O2 sensor for bank 1 sensor 2 above 1.2 volts… 2 The ECM detects the voltage high problem and turns on the Check Engine Light. 3 The ECM uses other O2 sensors to try and control the fuel injection with their values.
What happens when you get an OBD-II code p0136?
Many times, a P0136 error code will only cause a lit check engine signal; you may not notice any performance problems at all. However, your vehicle may exhibit the following symptoms as well: What Does the Code Mean? What does it mean when you get an OBD-II scanner code P0136? It has to do with the voltage in your O2 sensor.