What to do if the shift lever does not move?
If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever: To access the shift lever override, locate and remove the removable plug in the right side of the shift lever housing. Firmly set the parking brake.
What to do when your shifter is stuck?
Follow these 6 steps to release a stuck shifter 1 Set the emergency brake. 2 Insert key into the ignition and turn the ignition switch to the “ON” or “RUN” position. It is not necessary to start the engine. 3 Locate the shift lock override slot located on the shifter console near the shifter lever.
Why is the shift lever not working on a Yamaha G9?
On the Yamaha G9, the shift lever has a different alignment. It moves clockwise when you wish to move the cart forward. If you are facing the issue of the shift not working forward or reverse, it could be because a detent ball bearing may have fallen off during some other work on the transmission.
Why is the solenoid on my shifter not working?
In other words, if the electrical signal that causes the solenoid to lock and unlock the shifter is not reaching the solenoid because of an open circuit in the wiring — replacing the solenoid will not help. The shift interlock solenoid is located underneath the shifter console right alongside the shifter lever.
If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever: To access the shift lever override, locate and remove the removable plug in the right side of the shift lever housing. Firmly set the parking brake.
In other words, if the electrical signal that causes the solenoid to lock and unlock the shifter is not reaching the solenoid because of an open circuit in the wiring — replacing the solenoid will not help. The shift interlock solenoid is located underneath the shifter console right alongside the shifter lever.
Why does the gear shift not move forward or backward?
The gear shift moves, but the car will not move forward or backward. On the instrument panel, even when the shifter is in reverse or drive, it still says PARK on the instrument panel. HELP. I’ve been searching the forum but I have a hard time phrasing this in a way that pulls the same issue.