What does S stand for in automatic transmission?
“S” is for sport. If you’re driving on twisty country roads and want to keep the RPM up as you wind through corners, the “S” position is where you want to be. In “S”, the transmission holds lower gears longer for more power as you come out of the curves.
How do I find my engine code obd1?
To get the check engine codes to flash in your dash panel, use a jumper wire or a paper clip and connect terminals A and B of the diagnostic connector. Turn your ignition key on with engine off and the codes should start to blink. All codes should start with code 12 which is one long flash followed by 2 short flashes.
What does the maintenance required light on a Toyota Highlander mean?
Toyota Highlander: Maintenance Required Light Meaning. The maint reqd light means that Toyota recommends servicing your Highlander soon. Depending on what the vehicle mileage is when the light came on, it could mean that any of the following maintenance is needed: Engine oil change; Fluid check; Tire Rotation; Multi-point inspection
Is there a problem with my Toyota Highlander?
Your Toyota Highlander will run and drive completely normal. You do need to be aware that the vehicle stability control system is an important safety feature. Ignoring the problem for a prolonged period of time is not advised.
Can you drive a highlander with the reqd light on?
You most certainly can drive your Highlander with the maint reqd light on. Typically, it comes on in at 4500 miles for a 5000 mile service. It will eventually flash at you when you are getting closer to the 5000 miles side so that you’ll go in and have it serviced. You still need to have the maintenance done in a timely fashion though.
What makes the VSC light stay on on a Toyota Highlander?
Check VSC System Diagnosis: Toyota Highlander. 1 1. Loose/Bad Fuel Cap. Although it seems like it would be counterintuitive, a bad/loose gas cap can make the VSC light stay on. This should be the 2 2. Bad Wheel Speed Sensor. 3 3. ABS System Issues.