How to reset the timing belt on a Toyota Prado?
Turn ODO/TRIP button OFF then back on again all within 5 seconds 6. Trip B then displays the increment in km to next change of Timing Belt 7. Pressing the ODO/TRIP button repeatedly increments from the 150,000km preset through increments of 10,000km from 10,000 up.
When does the T Belt Light Come On?
Pressing the ODO/TRIP button repeatedly increments from the 150,000km preset through increments of 10,000km from 10,000 up. You can preset the T-Belt light to come on at an increment of your choosing from 10,000 to 200,000km.
How do you change the distance on a T Belt?
While in the T-Belt mode, each press of the trip switch will change the displayed value by 10,000km increments. Once ” 20 ” (200,000km) is reached the display reverts back to ” 1 ” (10,000km) again. Remember, this setting is the number of kilometres to be travelled before the light comes on next, and once reset this counter will start from zero.
How to reset Toyota Land Cruiser Prado 2015?
(Playback ID: 98tFkX7JNviwnPpg) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
How to reset the timing belt indicator light?
Hold in ODO/TRIP button while pushing ignition button twice (ignition back on) and then hold ODO/TRIP button for at least 5 seconds. T-Belt light flashes
How to reset the T Belt warning light?
T-BELT WARNING RESET COMPLETION a) After setting the replacement setting value, hold the trip switch ON for more than 5 seconds then release the switch. b) Check that the display has now changed back to ODO and that the warning light has gone off when the engine is started.
How to reset timing belt on Toyota Landcruiser?
This is tutorial on how to reset timing belt on Toyota Dyna / Toyota Landcruiser (Same procedure for both). 1. T-BELT MODE DISPLAY b) While pressing the trip switch, turn the ignition switch ON and hold it for 5 seconds. c) Release the trip switch, then press the switch again within 5 seconds. d) The digital display should change to T-belt mode.
When to reset the timing belt warning light?
As part of the service where the timing belt is changed, the Toyota service staff reset the warning light via computer. If you changed the timing belt earlier than when it’s due they can set a new odometer reading trigger for the timing belt that doesn’t match the service books. Adrian. Prado GXL 3.0L T Diesel Manual 2007 (update model).
How do you change the timing belt on a Honda Accord?
3. Turn ignition OFF (One push of ignition button) 4. Hold in ODO/TRIP button while pushing ignition button twice (ignition back on) and then hold ODO/TRIP button for at least 5 seconds. T-Belt light flashes 5. Turn ODO/TRIP button OFF then back on again all within 5 seconds 6. Trip B then displays the increment in km to next change of Timing Belt
How do you reset the timing belt light?
You can’t post conmments that contain an email address. the reset procedure of the timing belt light is all done by pressing the trip meter button and holding it in whilst the ignition is turned to on then select from the trip button then continue pressing until you come to 15 on trip metre, turn off and then restart. The light should then go off.
How often do you change oil in a 3L D4D GXL Prado?
No announcement yet. I have a 2009 3L D4D GXL Prado. I have had it since 90,000. I have changed oil and filters every 5000km myself. I have also changed the inline and main diesel filters at about 120,000. I need to change my timing belt soon.
How to reset timing belt light on Toyota Hilux diesel?
The timing belt light displayed on the dash on a 2007 Toyota Hilux diesel is reset using the following manual procedure. Turn ignition on. Make sure the Odometer/Trip meter display shows odometer information. Turn ignition switch off. Press and hold the odometer/trip display button whilst turning ignition on.
How do I cancel timing belt warning light on?
Switch ign off. While perssing the ODO button, turn the ign on and hold the button for 8 seconds, release the button and press it again within 5 seconds. Now in the TBelt mode each time you press the trip button you will increase the Km’s by 10,000. Once you get “15” displayed (150,000km), press and hold the trip button for more than 5 seconds.