What kind of timing belt does a Toyota Camry have?
This motor is commonly found in the Camry, Celica, MR2 and RAV4 from 1990 to 2001. (For a six-cylinder Camry, see my article on MZFE timing belt replacement ).
What kind of engine does a Toyota Camry have?
The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double overhead cam (DOHC) engine design. This motor is commonly found in the Camry, Celica, MR2 and RAV4 from 1990 to 2001. (For a six-cylinder Camry, see my article on MZFE timing belt replacement). 5SFE timing belt diagram
How long does it take to replace a pump on a Toyota Camry?
If the engine lifts up and settles back down, a new front mount may be in order. Replacement is simple and straightforward. Expect to spend approximately three hours replacing the timing belt, guide pulley, and tensioner pulley alone. Replacing the water pump adds about a half hour, and replacing sprocket seals adds about a half hour per seal.
How often should I replace my timing belt?
They also recommend replacing the belt every 6 to 7 years, even if you haven’t reached the mileage threshold. Oil leaks from the vicinity of the passenger-side front wheel may indicate a need to replace the timing belt and seals.
Do you need to replace the water pump on a Toyota Camry?
Although many dealerships and private service stations recommend replacing the water pump along with the timing belt, the Aisin brand water pumps used in Toyotas are actually very durable.
What causes oil leak in Toyota Camry 5sFE?
Oil leaks from the vicinity of the passenger-side front wheel may indicate a need to replace the timing belt and seals. The 5SFE is a “non-interference” engine, meaning that if the belt breaks while the car is running, the valves and pistons are unlikely to be damaged.
When to replace the seals on a Camry 5sFE engine?
On 5SFE engines with over 100,000 miles, there is a good possibility that the seals on the camshaft, crankshaft and oil pump will be worn. These seals are inexpensive, though time-consuming to replace.
What should the idle RPM be on a Toyota Camry?
The idle RPM should be approximately 700 RPM. Attach the timing light to the vehicle by connecting the black clip to the negative terminal on the car battery and the red clip to the positive terminal. Connect the timing wire to a spark plug wire for cylinder #1, the one closest to the belts and pulleys on the front of the vehicle.
What happens if you set the timing on a 1991 Toyota Camry?
Bad timing also affects the emissions from an engine. Adjusting the timing on a 1991 Toyota Camry requires a few tools and some precise mechanical adjustments. Start the vehicle and let it get to normal operating temperature.
What does it mean when timing belt breaks in Toyota?
As long as the two are properly timed relative to one another they operate fine, but if the timing belt breaks they can contact one another. This can bend the valve stems and ding the piston surfaces. These are called “interference engines”. Most Toyota engines are not interference engines.
What to do if your Toyota Camry front mount cracks?
The rubber vibration dampener inside the front mount has a tendency to dry rot and crack with age. A simple test is to “blip” the engine (turn it on for an instant), with the transmission in gear, while keeping your foot on the brake. If the engine lifts up and settles back down, a new front mount may be in order.