How do you reset the maintenance light on a 5th generation 4Runner?
Push and hold the mileage reset button while turning the key into the “on” position. You will see the odometer digits countdown to zero and once they all are at zero, the maintenance light has reset and you may release the button.
Where is the reset button on a Toyota 4runner?
Turn the engine on and then find the reset button which is located to the right and bottom of the steering wheel on the instrument panel. Press and hold the reset button once You have found it.
Is the power window on a Toyota 4Runner working?
This article applies to the Toyota 4Runner (1984-1995). Power windows are one of the greatest features on modern vehicles, until the day comes that they stop working. Power windows are pretty complicated, so it can be tricky to narrow down what exactly went wrong with them.
Where is the integration relay on a Toyota 4Runner?
All of your power windows operate through one large fuse block called the integration relay. It is located on the back of the fuse box behind the driver’s side kick panel. The relay is connected to a fuse. Although, you might want to check the fuse first.
How do you change the fuse on a Toyota 4Runner?
Set your multimeter to ohms and touch the probes to the opposing prongs on the fuse. If the meter doesn’t change, then the fuse needs to be replaced. If the meter shows less than one ohm, then the fuse is still good. Below the fuse box you should see the integration relay.
What to do if your power window is not working?
If the contacts are dirty, spray them with contact cleaner and then wipe off the fluid with a cloth. Then, check it again using your multimeter. If the switch is still not receiving power, the problem is somewhere further down the circuit. If there is power, but the switch is still not working, try replacing it with a different switch.