How tight should alternator V belt?
The belt should have no more than a 1/2 inch of slack to be properly tensioned. Adjust the belt as needed from the adjustment bolt until the slack in the belt is no more than a 1/2 inch.
How do you know if alternator belt is too tight?
Hold the belt between finger and thumb at this point and move it from side to side. See how much it deflects at the centre of the run. If it moves more than 1/2 in. (13 mm) it is too slack – any less movement and it is too tight.
How do you know if your drive belt is loose?
A loose drive belt will often be noisy, squeaking a bit, or emitting a high-pitched squeal. The most obvious sign of a loose drive belt, though, is in its appearance and tension. A loose belt, simply stated, looks and feels loose.
How long does it take to tighten an alternator belt?
You will need to adjust an alternator belt whenever it has been removed from the car. It’s easier to do this with two people, but one person can manage the job, and it will only take about 10 minutes.
How tight or loose should alternator belt be?
Pull the alternator away from the engine until the belt is tight . You want to be able to press down on the belt at a mid point between two pulleys and only be able to move it downward about 1/8 to 1/4 inch. When you have the alternator in the right position, have an assistant tighten the top bolt and nut to lock the alternator in.
Does an alternator serpentine belt the same as a serpentine belt?
Whether it is sometimes referred to as a fan belt, alternator belt, or water pump belt, it is most properly called an accessory drive belt, V belt, or serpentine belt. Each vehicle has its own belt configuration, depending on its engine and optional accessories.
How do I tighten a serpentine belt?
Place the socket end of the socket wrench over the wing-nut and turn clockwise to apply tension. It is likely not possible to adjust this by hand, so check your socket set for a socket that will fit snugly over the wing-nut so that you can tighten the nut, thereby applying more tension to the serpentine belt.
What is a belt tensioner Assembly?
The belt tensioner assembly of your vehicle is designed to allow several engine parts to be operated by one serpentine belt. The belt is tightened or loosened by adjusting the belt tensioner with a tensioner tool or socket wrench. Occasionally, the belt tensioner assembly can wear out, causing the serpentine belt to wear unevenly.