How do you change rear drum brakes?

How do you change rear drum brakes?

Part 1 of 4: Prepare the vehicle

1. Materials Needed.
2. Step 1: Loosen the lug nuts of the vehicle.
3. Step 2: Secure the vehicle on jack stands.
4. Step 2: Remove the brake drum.
5. Step 3: Clean the drum brake assembly.
6. Step 4: Inspect the brakes.
7. Step 5: Disassemble the brake drum assembly.
8. Step 6: Remove the brake drum shoes.

When should I replace my rear brake shoes?

The brake shoes on your car are designed to last around 35,000 miles, but in some cases they will not make it that far. There are a variety of things that can lead to increased wear on a set of brake shoes, like damaged hardware or warped brake drums.

When to change brake shoes?

Brake shoes should be replaced when the friction material has worn down to within 1/32 inch (0.8 mm) of the rivets. If the friction material is bonded to the backing plate (no rivets), then the shoes should be replaced when they have only 1/16 inch (1.6 mm) of material left.

How do you replace brake shoes?

Grip the brake pads on either side and pull them directly toward you to separate them from the backing plate. The springs will come with the brake shoe set, but the parking brake cable should remain with the vehicle. Once the brake shoe set have been removed from the backing plate, you can begin replacing the pads.

How do you adjust rear brake shoes?

Step 1: Lift the rear end of the vehicle. Step 2: Remove the tire. Step 1: Access the drum brake adjustment star wheel. Step 2: Adjust the star wheel. Step 1: Check your work. Step 2: Install the tires. Step 3: Lower the vehicle. Step 4: Test drive your vehicle.

How thick are the brake shoes supposed to be?

Every brake shoe manufacturer will have its own recommendation for the minimum amount of thickness that a brake shoe should have. While some manufacturers may recommend a minimum thickness of 1.5 millimeters, most auto mechanics will recommend 3.0 millimeters instead.