How do you reset the maintenance light on a Toyota Sienna?

How do you reset the maintenance light on a Toyota Sienna?

Push and hold the mileage reset button while turning the key into the “on” position. You will see the odometer digits countdown to zero and once they all are at zero, the maintenance light has reset and you may release the button.

How do you turn off the maintenance required light on a 2008 Toyota Corolla?

How To Reset Maintenance Warning Light On Toyota Corolla

  1. Turn on your car. Get in the car and start your vehicle.
  2. Set your odometer to the ODO.
  3. Next, turn the key off.
  4. Press and hold the ODO/TRIP button and turn the ignition key to the ON position.
  5. Keep holding the button.
  6. Release the button and start the engine.

How to reset the Toyota maintenance required light?

Turn the Vehicle Off and Press the Trip Meter Reset Button Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. Hold this button for a while. For some models, this is the button used to switch from the odometer reading to the other two trip meters. 3.

How to reset the maintenance required warning light?

Press And Hold ODO/TRIP BUTTON And Turn Ignition To The “RUN” Position. Hold Knob For At Least 5 Seconds Until “MAINT REQD” flashes multiple times and the light goes off. Turn The Ignition OFF. Maintenance Reset Is Complete. The Toyota Tacoma is a pickup truck manufactured in the U.S. by the Japanese automobile manufacturer Toyota since 1995.

Why does my Toyota maintenance light keep flashing?

The Toyota maintenance light relies entirely on the odometer counting those 5,000 miles, so it has no way of detecting if you changed the oil in the meantime. That’s why this light can become annoying if you just changed your oil and it flashes on your dashboard reminding you to do it.

How do you reset a Toyota Tacoma engine?

Press And Hold ODO/TRIP BUTTON And Turn Ignition To The “RUN” Position. Hold Knob For At Least 5 Seconds Until “000000” Is Displayed. Then Turn The Ignition OFF. Turn The Ignition ON. Don’t Start The Engine.