What is 4E engine?
4E. The 4E is a 1.3 L (1,331 cc) DOHC version. Bore and stroke is 74 mm × 77.4 mm (2.91 in × 3.05 in). Output ranges from 74 hp (55 kW; 75 PS) at 6,400 rpm to 99 hp (74 kW; 100 PS) at 6,600 rpm with 81 lb⋅ft (110 N⋅m) of torque at 3,600 rpm to 86 lb⋅ft (117 N⋅m) of torque at 4,000 rpm.
Is 4efe an interference?
1MZ-FE is non-interference.
What engine is in the 99 Corolla?
1.8 L 4-cylinder
1999 Toyota Corolla/Engine
What is the labor cost to replace an engine?
Determine the labor costs by multiplying the quoted number of hours by the shop rate. The shop rate can vary greatly, from as little as $90 per hour to over $150 per hour. So using a low-end shop rate of $110 and a high of $150, the labor on a typical engine replacement can run anywhere from $1,100 to $1,800.
How much horsepower does a 4age have?
SPEC SHEET
| ENGINE | |
|---|---|
| Bore & Stroke (mm): | 81mm x 77mm |
| Peak Horsepower (@ RPM): | 112 hp @ 6,600 RPM, 157 hp @ 7,400 RPM (20V), 167 hp @ 7,400 RPM (4A-GZE) |
| Peak Torque (@ RPM): | 97 lb-ft @ 4,800 RPM, 119 lb-ft @ 5,600 RPM (20V), 155 lb-ft @ 5,600 RPM (4A-GZE) |
| Pistons/Compression Ratio: | 9.4:1, 10.3:1, 10.5:1 (20V) |
What is Starlet GT?
The Starlet GT Turbo is a high performance model of the fourth generation Starlet, first introduced in 1990 as a successor to the 70 series Starlet 1.3 Turbo R. The EP82 GT turbo was powered by a turbocharged version of a Toyota’s E Engine, the 4E-FTE with a CT9 turbocharger.
How much HP does a 1999 Toyota Corolla have?
120 hp
1999 Toyota Corolla/Horsepower
What kind of engine does the Toyota 4E-FE have?
Toyota 4E-FE 1 General information 2 Cylinder block. The Toyota 4E-FE has a cast-iron cylinder block with five bearing support system. 3 Cylinder head. The cylinder head is made of aluminum alloy which gives it good cooling efficiency. 4 Maintenance data. 5 Vehicle applications.
What kind of engine does a Toyota Corolla have?
Sienna Toyota 4A-F and 7A-FE engines: details and photos The 4A engine series was a 1587 cc (1.6 liter) engine, introduced in 1988, and revised to 4A-FE in 1993; it was mainly used in the Corolla, and was replaced by the ZZ series in the 1998s.
How much horsepower does a corolla 1ZZ Fe have?
That was more power than the 7A-FE, at lower engine speeds, so that the Corolla was peppy at all engine speeds. Eventually, the 1ZZ-FE would reach 130 hp and 125 lb-ft of torque.
What’s the valve clearance on a Toyota 4e Fe?
The 4E-FE engine used special valve shims to adjust the valve clearance. Calculate the thickness of new adjusting valve lifter so valve clearance comes within specified values. Valve lifters are available in 17 sizes to range from 2.50 mm (0.098 in) to 3.30 mm (0.130 in), in steps of 0.05 mm (0.0020 in).