Can you put a 22RE in a 22R truck?
The stock 22R head can be used with 22RE intake (if it’s an ’85 and later head), so there’s no need to get an EFI head unless the head you’re using is an early 22R head, in which case you’ll need to drill and tap three new holes or use the donor EFI head.
What is the difference between Toyota 22R and 22RE?
22R and 22RE are essentially the same engine, except that the RE has fuel injection slapped onto the intake. that said, putting an engine from a EFI’d truck will NOT give you fuel injection because it’s not the engine (block/head) that’s different. in fact you could convert your current engine to EFI if you wanted.
Are 22R and 22RE blocks the same?
22r and 22re are the same blocks. ’85 and up have a “lazer block” which has a slightly shorter deck height. The older blocks are taller so if you mis-match blocks and heads the accessory brackets will not line up just right but they will work. The heads off a 22r will NOT work on a 22RE intake.
Is the 22RE carbureted?
Specs. The carbureted 22R, from 1981 to 1990, developed 72 horsepower and 174 foot-pounds of torque. The 22RE in 1983 produced 78 horsepower and a 185-foot-pound torque rating, and then saw output climb in 1985 to 84 horsepower and 192 foot-pounds of torque. Toyota motorhomes had different horsepower ratings.
Can you put a 22RE head on a 20R block?
It is possible to run a 20R Head on an 85-95 laser block. In order to keep the cam and crank centerline consistent with an 85-95 head, you must mill the 20R head to a measurement of 3.130 (measured from the bottom of the front cam journal to the deck of the head).
Is there a 22RE to 22R conversion kit?
Many of our LC customers have been coming to us for an easy all in one kit for a 22RE to 22R conversion kit but that is a hard thing to do since there are so many different ways you can go when doing this conversion.
Is the 22R head the same as the 22RE head?
Somebody more of an expert can aswer this better, but the short answer is no, they are not interchangeable. (at least not easily). The 22R head does not have quite the same mounting surface/bolt pattern for the intake manifold. I believe there is a valve clearance issue too… Anyone else want to field this better?
Can a 22R vacuum be changed to a 22RE?
See Part# 1082021 With the ECU removed the distributor has to be changed next since it will no longer have anything controlling it you will have to swap to the earlier style vacuum advanced 22R distributor style. See Part# 1081051
Can a fuel pump be replaced in a 22R?
See Part# 1035042. For this option you will of course have to drop the tank and remove the stock RE pump and then install the mechanical pump that is very reliable and you no longer have to worry about dropping the tank ever again to replace a fuel pump which is a plus.