How do you turn off the maintenance required light on a 2010 Toyota 4runner?
2010-2021 4Runner
- Get in the car and turn the ignition key to the RUN position.
- Make sure your odometer is on TRIP A.
- Turn off the car.
- Hold down the ODO/TRIP button while turn on the car again.
- Continue to hold down the ODO/TRIP button until you get to all zeros flips back to trip a.
How to turn off maint reqd light on Toyota 4Runner?
1 Turn the key to the on position with the odometer showing. 2 Press and hold the odometer button. 3 Turn the key to the off position while still holding the odometer button. 4 Without releasing the odometer button, turn the key to the run position. 5 Wait a few seconds for the light to turn off.
How do you reset the trip meter on a Toyota 4Runner?
With engine running, Press the trip meter reset button to bring up trip meter “A”. Then Turn The IGNITION To OFF. While holding the trip meter reset button, press the “ENGINE START/STOP” button once/Turn Ignition key on. Continue to hold the button until “000000 or RESETTING MAINTENANCE DATA ” is displayed.
Where to reset the Toyota maintenance required light?
Keep pressing the button while watching the odometer. It should flash and/or display zeros before reappearing as normal. You can now release the trip reset button and the Toyota maintenance required light should be off. The Ackerman Toyota service center in St. Louis is your trusted source for Toyota maintenance both large and small.
How to turn off maintenance light on Toyota Tundra?
If your car has START push-button, press the “Start” without touching the brake pedal. If your car has START push-button, press the “Start” twice without touching the brake pedal. Continue to hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.