What are the colors of the ground wires connected to both fog lamps?
The red wire leads from the battery, to a fuse, to one terminal on the switch. The white wire leads from the other terminal on the switch to the fogs, and the black is ground from the fogs. * If the kit has a relay: It can vary, but usually the white wire will still be the lead from the relay to the lights.
How do you attach a toggle switch to fog lights?
How to Hook Foglights to a Toggle Switch
- Cut the wire connecting your fog lights to their power source using your diagonal pliers.
- Remove 1/4 inch of insulation from both new ends of the power wire with your diagonal pliers.
- Connect the wire running to your power source to the “source” terminal of your toggle switch.
Can you hook up fog lights to headlights?
If you do wire them into the headlights, make the headlight wire be the trigger on a relay. Then wire the relay into the battery, ground, and fog lights. You don’t want to drive the fog lights through your headlight wire.
How to draw a wiring diagram for a fog light?
1 wiring diagram and users instruction. This is a general wiring diagram for automotive applications. 12v universal wiring harness kit relay fuse switch. Fog lights off with high beams on relay wiring diagram. Draw a diagram on plain white paper with wire gauge noted and colors identified.
Can a fog light be wired with a relay?
Fog light wiring diagram with relay. Failure to do so would cause excessive heat in the wiring and switch and create a risk of fire. Pictured is my wiring diagram for installing two fog lights with fuses a switch and a relay. It is for this reason that we present here the proper way to wire a fog light systems.
Where is the power switch on a fog light?
1 pre installed power switch. When the coil of the relay is energized 12v from the high beam switch to terminal 86 ground on terminal 85 the normally closed contacts open interrupting 12v to the fog. 1 wiring diagram and users instruction.
Where do you wire a fog light on a car?
Attach the BLACK wires from the lamps to the vehicle ground. Position the relay upright on the battery side of the engine compartment in an area that is not exposed to water spray, excessive heat or moving parts.