How to check the ignition system in a Toyota Tacoma?
Use the ohmmeter to check the camshaft position sensor’s resistance. Measure between the G+ and G- terminals on the sensor connector. The resistance should be 185 to 275 ohms on a 2RZ-FE engine and 835 to 1,400 ohms on the rest. Move to the crankshaft position sensor, measuring the resistance between its connector terminals.
What’s the resistance on a Toyota Tacoma engine?
The resistance 9.3 to 16.0 kilo-ohms on a 5VZ-FE Tacoma engine and 9.7 to 16.7 kilo-ohms on the others. Use the ohmmeter to check the camshaft position sensor’s resistance. Measure between the G+ and G- terminals on the sensor connector.
Where is the spark plug on a Toyota Tacoma?
Install the spark plugs to the ignition coil or spark plug cables, attach the ignition coil electrical connector and disconnect the electrical connection from each fuel injector. Ground the spark plug to a metal spot on the engine. Crank the engine and look for a strong blue spark on the plug.
When do you need to replace the ignition pickup?
If your car has an electronic distributor ignition system and the engine stalls or car does not start, you may have to replace the ignition pickup. Average rating from 130,153 customers who received a Vehicle Engine Electrical Inspection. Electronic ignition pickups are a component found on traditional electronic distributor ignition systems.
When do you need to replace distributor on Toyota Tacoma?
If you think you need to replace the distributor in your Toyota Tacoma, first be sure you have a model made between 1995 and 1997. The 2.4L, 2.7L and 3.4L engines had distributors. Here’s how the home mechanic can replace the distributor; you won’t need to buy special tools. Look for the distributor by following the spark plug wires to it.
What is the distributor number on a Tacoma?
You can order distributor part number 84170N for your Tacoma from Parts Train (see Resources). Other manufacturers will have different numbers, so know your model year and engine size. Tighten down the pinch-bolt and replace the distributor cap and wires.
How can you tell if your Toyota Tacoma fuel pump is going out?
The only way that you are going to know that your Tacoma’s fuel pump is going out is that it is no longer providing enough fuel pressure to keep the engine running under a heavy load, or at high-speed. Typically, if you are heading up a hill (or accelerating) the engine may start to feel like it is just running out of steam.