How do you check the transmission fluid on a 2009 Toyota Tacoma?
How to Check Your Transmission Fluid
- Turn the car on.
- Find the transmission fluid dipstick.
- Pull out the dipstick and touch the fluid, moving it around between your thumb and forefinger.
- Use a rag to wipe off the dipstick.
- Use a funnel to bring the fluid level up to the right spot.
Does a 2009 Toyota Tacoma have a transmission dipstick?
Find the transmission dipstick, which is usually brightly colored and toward the back of the engine. Remove the dipstick, being careful not to spill or drip any fluid. Wipe off the dipstick with a clean rag, just as you would do when checking the engine oil.
How much transmission fluid Toyota Tacoma?
2016 2017 2018 2019 2020 2021 Toyota Tacoma Transmission Fluid Capacity
| Transmission | Fluid capacity | Fluid type |
|---|---|---|
| R156F manual transmission | 2.2 liters (2.4 quarts; 4.6 pints) | 75W-90 |
| RC62F manual transmission | 2.5 liters (2.7 quarts) | 75W-90 |
| 6 speed AC60F automatic transmission | Total Fill 8.6 liters (9.1 quarts) | WS |
How much transmission fluid does a 2009 Toyota Tacoma take?
2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Toyota Tacoma Transmission Fluid Capacity
| Transmission | Fluid capacity |
|---|---|
| R155F (4WD) manual transmission | 2.2 liters (2.4 quarts; 4.6 pints) |
| RA60 6-speed manual transmission | 1.8 liters (2 quarts) |
| 4 speed A340E automatic transmission | Total Fill 12.3 liters (13 quarts) |
How do you change transmission fluid on a Toyota Tacoma?
The overflow plug works as your dipstick, so fill the transmission with fluid until oil starts overflowing from that plug. Read on to learn how to replace the transmission fluid on your Toyota Tacoma.
How do you replace the overflow plug on a Toyota Tacoma?
The overflow plug works as your dipstick, so fill the transmission with fluid until oil starts overflowing from that plug. Read on to learn how to replace the transmission fluid on your Toyota Tacoma. Locate both the fill plug and the overflow plug, then remove them.
What should fluid temperature be in Toyota Tacoma?
The fluid temperature MUST BE between 46°C (115°F) and 56°C (130°F) to accurately check the fluid level. Toyota techs utilize the Toyota computerized scan tool to accurately verify the ATF temperature. Since most of us have no access to the Toyota tool, we must utilize method “B” and use the trucks onboard diagnostic system (OBD).
When to change the transmission fluid on a Toyota PreRunner?
Transmission Fluid and Filter Change for a 2010 Toyota Tacoma PreRunner SR5 TRD Sport with a 5 speed automatic Transmission. Toyota recommends checking the Transmission fluid every 30,000 miles or so in extreme driving conditions; however, they don’t have a set maintenance schedule to service the transmission or change the fluid & filter.