Why does my 4WD light keep flashing?
The purpose of the 4 wheel drive light is to indicate when you have engaged 4WD mode by selecting 4H. When the light flashes continuously for more than 30 seconds it signifies there is a problem somewhere on your drivetrain system and that 4WD has not engaged properly.
How to tell if my 4WD is working?
- Put the vehicle in 4LO, and allow it to move forward in a STRAIGHT LINE.
- Have somebody look under the vehicle to see if both driveshafts and axles move freely WITHOUT YOU PRESSING THE GAS PEDAL.
- Do the same in reverse.
- If the vehicle moves freely, more likely the 4WD is just fine.
Why does the 4 wheel drive light stop flashing?
The transfer case neutral position needs to be selected before you attempt to engage 4WD. The selected position indicator light will flash until the transfer case completes the shift. When the shift is complete, the indicator light for the selected position will stop flashing and remain ON.
What does the blinking 4 wheel drive indicator mean?
So what is that 4 wheel drive indicator blinking on your dashboard means? The purpose of the 4 wheel drive light is to indicate when you have engaged 4WD mode by selecting 4H. When the light flashes continuously for more than 30 seconds it signifies there is a problem somewhere on your drivetrain system and that 4WD has not engaged properly.
How does a 4 wheel drive light work?
It accomplishes this by means of a small electric motor bolted onto the transfer case that shifts a pin in place to lock the center transfer differential. The actuator allows you to shift from 2WD to 4WD on the fly and back to 2WD without stopping and can be engaged and disengaged by means of a switch inside the cabin, usually on the dashboard.
When does the selected position indicator light stop flashing?
The selected position indicator light will flash until the transfer case completes the shift. When the shift is complete, the indicator light for the selected position will stop flashing and remain ON. If any of the shift conditions are not met, the indicator position light will continue to flash. You cannot be in gear for it to work.