What is a TCM connector?
The TCM connector is a multi-wire electrical connector, which can set a variety of DTCs. Different conditions and driver notifications may be caused by one of the terminals in the electrical connector not coming into contact with the pins in the module. Components on different lines are in different circuits.
What kind of connector is the TCM connector?
Why is the lock not moving on my TCM?
(Fig. 30) Operating the lock lever may show that the lock is not moving properly. To correctly install the TCM connector, place the connector onto the TCM and squeeze the connector lever lock housing to ensure the lock bars are moving into the proper position on the TCM connector body.
How to know the pinout of a male connector?
Also, here is an image of the pinout for a male connector: Assuming your connector counts from 1 to 9, you only have to test where pin 1 is and you know the rest. 1: with a continuity test you check whether there is an electrical connection between to points, i.e. if it conducts. You can check what wire is connected to what pin with such a test.
What causes a K71 TCM connector to be cocked?
Due to the cause of the condition, and the positions of the wires in the connector, it is unlikely that more than one circuit will be affected by the condition. Inspect the K71 TCM connector for proper seating. An initial inspection may show that the connector is cocked or high on one side of the connector body.
The TCM connector is a multi-wire electrical connector, which can set a variety of DTCs. Different conditions and driver notifications may be caused by one of the terminals in the electrical connector not coming into contact with the pins in the module. Components on different lines are in different circuits.
Where is the TCM located in a car?
While swapping out a box might seem simple, the TCM is located inside the transmission in many modern cars, trucks, and SUVs. Opening the transmission is a laborious task, which is why it is reasonable to expect labor costs of at least $300 to replace the transmission control module.
What does a Transmission Control Module ( TCM ) do?
Your vehicle’s transmission control module (TCM) is like a tiny computer. It has the important job of interpreting electrical sensor output of components in an engine with an automatic transmission . What is a Transmission Control Module?
(Fig. 30) Operating the lock lever may show that the lock is not moving properly. To correctly install the TCM connector, place the connector onto the TCM and squeeze the connector lever lock housing to ensure the lock bars are moving into the proper position on the TCM connector body.