Why do my tail lights work but my brake lights don t?

Why do my tail lights work but my brake lights don t?

Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Blown out lights could be a reason.

What do you do when your brake lights wont turn on?

When the brake lights will not come on, the first thing to check is the third-brake light. If it too is not working, the brake-light switch, a bad fuse or an unplugged harness is likely. A quick test is to try the emergency-flashers, on vehicles that use the brake lights as flashers.

Why is my brake light not turning on?

A problem in the brake light switch defect can stop the brake lights from turning on when a driver presses on the pedal to slow down. Subaru believes certain cleaning products used inside the car can gunk up the switch’s electrical contacts.

What are the symptoms of a defective brake light switch?

Common symptoms of a defective brake light switch. Car stuck in Park. ABS ESP ETS lights come on. Can not move the shifter from Park to Drive. Car won’t shift gears. Stuck in 2nd gear, limp mode. Brake lights don’t work. (Brake light switch can still be defective even if the brake lights work. Checking the brake light operation is not a good test.)

What do I need to change the brake light switch?

Checking the brake light operation is not a good test.) ESP, BAS, ABS lights turn on. Car won’t shift properly. Stuck in gear. To change the brake light switch on your Mercedes-Benz you will need a star torx bit set. You can buy a set on Amazon for under $20. One of our favorite sets is the Neiko 10071A 13-Piece Torx Bit Cr-V T-Socket Set.

Where are the brake lights on my car?

You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights.