How do you remove the back of a seat?
If you want to remove them: “There are two clips for the lower portion of the rear bench seat, they are located on the footwell edge, in the centers of the two outer seat positions. Pull them straight up quite hard, and they “pop” out.
How do you remove the back seat of a wagon?
1) Feel with your fingers where the seat meets the carpet, until you feel two front clips. 2) Near those points, push the seat towards the back of the car and up (the two clips will disengage). 3) Lift the seat up to release it from the rear hooks holding it in place.
What’s the best way to remove the back seat?
From inside the car remove the two bolts holding the lower section of the back seat using the T40 socket. with the lower section out of the car you can replace the two bolts so you don’t lose them. Using the T45 socket remove the mounting points for the 3 rear seat belts, middle and both sides.
How do you remove the back seat in a focus?
The back seat should now look like this, with the lower carpet removed. In the middle of the two hinged seats you will see a bolt this holds the middle hinge for the seats. Using the T40 socket remove this bolt and slide the metal piece it was holding toward the front of the car to remove it.
How do you remove the rear seat belts?
Using the T45 socket remove the mounting points for the 3 rear seat belts, middle and both sides. It is necessary to remove the sides because you have to unloop the shoulder straps on the sides through the elastic, you could skip removing the two sides and just cut the elastic if you wanted to also.
What’s the best way to unbolt a car seat?
Utilize a screwdriver to ensure the tab is legitimately situated in its space when the back is introduced. In the event that further dismantling is required, the seat areas can be unbolted from the floor rails. This is perfect for decreasing conveying weight or turning tight corners in stairwells. 3. Bolted on backs