Why do my wiper blades only work on high?
If the reading is made only on the high-speed terminal, the switch has failed. Inside the switch are a number of terminals that are sprung to make contact as the control is turned or slid like a lever; these contacts can lose their “springiness” and fail to make contact.
Why have my wipers stopped working?
There are a number of reasons why windscreen wipers stop working and these include: torn wipers, broken controls, a blown fuse, faults with the motor, damaged arms, snow or ice covering, loose pivot nuts and a break in the wires. Torn wipers – wiper blades are comprised of plastic with rubber attachments.
Can a low speed windshield wiper still work?
Use your multimeter to bridge between the low speed terminals on the switch and the wiper motor; with the switch moved to “Low” you should get at least a 10-volt reading. If you do, the wiring is fine; if you do not, the wiring has failed. Repeat the exercise with the intermediate speed.
How do you adjust the park position on a wiper?
Use a socket wrench to remove the nut located at the center of the wiper motor. This nut connects the arm linkage to the motor. Turn the wipers on, then back off, so the motor completes a full cycle and returns to the correct park position.
When do I Know my wiper relay is bad?
One of the quickest indicators that a problem exists with the intermittent wiper relay is when the wipers are not intermittent and only work at one speed. The relay switch sends an electrical signal to the module that controls the operation of the wiper motor and gears inside.
Why does my car not have a wiper motor?
This is usually caused by the wiper motor not getting the power that it needs due to a bad relay. In most cases, a professional mechanic will replace the intermittent wiper relay and the controls at the same time to ensure all of the supporting connections work smoothly together.