How to reset the Check Engine light on a 1993 Toyota?
You can reset the Check Engine light on your ’93 Toyota without any special tools. The vehicle’s Electronic Control Unit (ECU) stores trouble codes sent to it from the emissions system or from the engine. When the ECU receives a trouble code, it illuminates the Check Engine light on the instrument panel.
When does the warning light turn off on a Toyota?
If the front passenger’s seat is occupied, the front passenger’s seat belt also needs to be fastened to make the warning light (warning buzzer) turn off. The indicator light flashes after the ENGINE START STOP switch has been turned off to indicate that the system is operating.
What does the slip indicator light mean on a Toyota?
If the vehicle is in danger of slipping or if any of the drive wheels spins, the slip indicator light flashes to indicate that the VSC/TRAC systems are operating. Depending on the vehicle, a buzzer (intermittent) may sound to indicate that VSC is operating. Your vehicle is equipped with a front passenger occupant classification system.
How does the lockout button work on a Toyota?
When pressed, you will usually see a light appear on the dashboard that says “O/D off.” The button works as a toggle. Thus, pressing it once activates the O/D lockout.
Where to find check engine light code on Toyota?
When retrieving Toyota check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.
When does a Toyota engine have a trouble code?
This trouble code is usually triggered when the O2 sensor in position bank 1, sensor 1 is bad or has faulty wiring. Replacing the sensor will almost always get rid of the code.
What to do if your Toyota engine is not working?
Check the coolant first, then test the voltage of the sensor to narrow down is the problem is related to the sensor or the thermostat. This is a very common Toyota code. Try cleaning the throttle body and resetting the light, then waiting to see if it comes back before taking further action.