Why is my alternator putting out 14 volts?
If the alternator is working well, your multi-meter should read somewhere in the vicinity of 14 volts (typically 13.8-14.2). If it is reading excessively higher than 14 volts (greater than 15 volts) it is possible that the voltage regulator on your alternator is faulty or going bad.
Why is my brand new alternator not charging my brand new battery?
The most obvious reason why your battery won’t charge when your alternator is brand-new is that the problem is with the battery itself. If you’re not 100% sure, you can use a multimeter, or a voltmeter, to check the current coming from your battery.
Is 17 volts too high for alternator?
17V is too high for any 12 V battery. 17 volts is just about max unregulated output on a 12 volt alternator so I would suspect that the voltage regulator is defective or somehow not working correctly. To put things in less dramatic terms.
Why is my alternator putting out 17 volts?
17 volts is just about max unregulated output on a 12 volt alternator so I would suspect that the voltage regulator is defective or somehow not working correctly. To put things in less dramatic terms.
How many volts should a battery put out?
Fully charged automotive batteries should measure at 12.6 volts or above. When the engine is running, this measurement should be 13.7 to 14.7 volts. If you don’t have a multimeter to tell you the voltage of your battery, you can do a test of your electrical system by starting the car and turning on the headlights.
Can a new alternator run over 14.5v?
Bought a replacement alternator but I am sending it back as I measured and have seen it running over 16.5V. The manual says the regulator should keep it to a max of about 14.5V. I put a brand new and fully charged battery in at the same time the alternator was changed, so I don’t think the battery can be blamed.
Is it normal for an alternator to not charge?
Still, it’s perfectly normal for others to see the alternator not charge at all intermittently. One test is not enough if you are diagnosing a charging system problem. All too often, the alternator is condemned as the source of the problem if only battery voltage is present with the engine running.
What should the voltage be on a bat alternator?
Measure the voltage across the battery and the big bat alternator terminal to alternator case. There are two things that you are looking for. The charging voltage should be between 13.9v to 14.4v. Also the voltage at the battery and the voltage at the alternator should be within 0.5v of each other.
What causes an alternator to output low volts?
If the voltage at the battery and alternator don’t match. For example the battery reads 12v and alternator reads 14v. This means that there is an issue with wiring. While applying the same conditions as above.