Why is the rear window on my Toyota Sequoia not working?
I have a 2001 Sequoia and the rear (tailgate) power window has ceased working. It does not work with the remote or the dash switch. The owner’s manual does not show a switch for the tailgate motor, nor was I able to find anything useful on the Toyota wiring diagrams posted in the technical part of TS.
Are there any recalls on the Toyota Sequoia?
Looking in the Sequoia owners forum, there are over 15,500 hits on a topic dealing with inoperable rear door latches on Sequoias. Another good reason for a recall on safety issues if you ask me. A kid or the groceries could fall out of the back of the vehicle if the door can’t be closed.
Can you cut the plastic off a Toyota Sequoia?
There’s no need to cut away the plastic on the lock assembly, if you’re patient and willing to channel your zen and the art of toyota repair. (Spent eleven hours on this yesterday between the lock mechanism and the broken handle–and I’ve done two handles before on my 00 Sienna -_- )
How to remove rear hatch on Toyota Sequoia?
After you remove the window regulator and prop up the window; Place the mirror in the hatch so you can see what you’re doing. Cut away the plastic covering the rear latch mechanism, it cuts easily if you have a SHARP knife, a short (3″blade) works fine if it’s heavy enough.
How do you remove a power window on a Toyota Yaris?
Once the screws are removed, use a door removal tool or carefully use a flat handle screwdriver to pop open the plastic clips holding the panel on. As you release these clips, you should hear a clicking sound. With the door panel loose, lift up and remove the panel.
What to do if your rear window is not working?
Slide the cover off and there is a recangular black cover plate and a wire harness that plugs in to the ECU. Remove the wire harness from the ECU and remove the snaps that hold the wire harness to the black cover plate. Take out the 6 or 8 screws holding the black cover plate in place.
How do you get the window down on a Toyota?
The only way to get the window down more than 1cm is to go down 1cm till it stops, then hit the auto-up button where it goes to the top, then will go down about 5″. That is the only way to get the window down at all, which unfortunately isnt enough to get my arm through to get parking passes in a garage or use the ATM etc…
Are there any problems with the Toyota Sequoia?
2001-2007 Sequoia – Common Problems A 2001 Toyota Sequoia Premature Front Lower Ball Joint Wear: The front lower ball joint in some first-generation Sequoia SUVs contains internal lubricant that deteriorates faster than expected. That leads to premature ball joint wear.
What causes a Toyota Sequoia switch to melt?
This allows debris and moisture to get in and cause the switch to short circuit and melt. Toyota addressed this issue by having its dealers either apply more lubricant to the switch or replace the switch circuit board for free.
What kind of car is the Toyota Sequoia?
Family fights to drive the Sequoia! Its a 2004, owned for 18 months, with 21K. It has been very reliable, so far. Yea it’s large, yet doesn’t ride like a big a boat. Makes you feel like your driving a vehicle half the size. Has a smooth, comfortable ride in any seat.
What should I do if my Toyota power window broke?
Check for proper operation of the “one–touch open and close” function by fully pushing the switch briefly to the “DOWN” and “UP” positions. At this time the power window switch for the passenger’s door window should be blinking. 4. Push down and hold the passenger’s door power window switch to completely open the window. 5.
How do you reset the auto window on a Toyota?
1. Push the auto down button and hold it at the bottom for a few seconds, 2. Push the auto up button and hold it at the top for a few seconds.
How to reset the power window on a Toyota?
2. front passenger window next: hold switch down 4 seconds, then up 4 seconds. 3. rear passenger window: hold switch down 4 seconds, then up 4 seconds. 4. end with rear driver side window: hold switch down 4 seconds, then up 4 seconds. Loading…
How can I find out if my Toyota Sequoia has rust?
Toyota agreed to extend the rust perforation warranty and fix the undercarriage on some affected Sequoia vehicles for free. To find these TSBs, you can try Googling the TSB ID #, the name of the TSB, or some combination. You can also go to https://www.safercar.gov and search for the TSB by entering your VIN.
Is there a problem with the Toyota Sequoia?
Just go to Google and search on “Toyota Sequoia problems” and read all the postings. If Toyota knows what’s causing the problem, they are not admitting to the fault.
What is the fuse box on a Toyota Sequoia?
Toyota Sequoia (2005 – 2006) – fuse box diagram Year of production: 2005, 2006 Engine compartment Toyota Sequoia mk1 – fuse box – engine compartmentToyota Sequoia mk1 – fuse box – engine compartmentToyota Sequoia mk1 – fuse box – engine compartment Instrument panel Toyota Sequoia mk1 – fuse box – instrument panel Fuses (type A) Fuse
Where are the screws on a Toyota Sequoia?
There’s two very small screws on the license plate side of the plastic cover. I was able to take a phillips head driver (very short one that goes in a drill) and reach behind and hand loosen the screws to take them out. I needed a small hand mirror and flashlight to locate the screws.
What’s the difference between a 2008 Toyota Sequoia?
The 2008 Toyota Sequoia is longer, wider and taller and gets all-new sheetmetal. From the side, it looks bigger than it really is because the axles were pushed apart, increasing the wheelbase and, therefore, expanding the passenger room.
What are the safety features on a Toyota Sequoia?
For 2008, the Toyota Sequoia’s standard safety features include anti-lock brakes and stability control. Larger disc brakes all around and the brake-assist system help to minimize emergency stopping distances. It has six airbags, including full-length side-curtain head protection. Eighteen-inch wheels are standard.
How big are the wheels on a Toyota Sequoia?
Stylish 20-inch-diameter wheels are optional on the Limited and standard on the Platinum. The 2008 Toyota Sequoia provides expansive passenger room in the two rear rows thanks to the new independent rear suspension, four-inch longer wheelbase and a one-inch increase in width.
What kind of system does a Toyota Sequoia have?
Stop lights, high−mounted stop lights, multiport fuel injection system/ sequential multiport fuel injection system, vehicle skid control system, traction control system (two−wheel drive models), active traction control system (four−wheel drive models), multiplex communication system (auto−door locking system)
What are the lights on a Toyota Sequoia?
Center interior and personal lights, personal lights, luggage compartment light, air conditioning system, wireless remote control system, garage door opener, ignition switch light, door courtesy lights, foot light, vanity lights, power antenna