Why is my Prius not able to start?
This is the result of some sort of power failure that is preventing the car’s computer from booting. If you find yourself unable to start your Prius, you may just need to reboot the computer, similar to when your computer freezes and you have to power it down and then restart it.
What to do if your 2004 Prius loses power?
If the same thing happens, your car may need to be towed and have the battery replaced. Another frequent occurrence with the 2004 Prius is that it will suddenly lose power while it is moving, and all of the warning lights on the dashboard will illuminate, including the Check Engine light.
Why was there a recall on the Toyota Prius?
Nobody wants their car to suddenly stop working. Unfortunately, Toyota recalled around 75,000 of their 2004 Prius cars because of some technical issues that were causing them to stall. This could be caused by several different failures in the car’s system.
How do you charge a stalled Prius battery?
Connect the positive (red or orange) cable to the battery of the stalled Prius. Leave the negative (black) cable clamped on a piece of metal or on the ground. Step 3: Connect the second pair of jumper cables. Attach the other positive and negative cables to a car with a working battery. Step 4: Charge the battery in the stalled car.
What should I do if my Toyota Prius stalls?
Not every single Prius will stall, but if you have a 2004 model, it may be a common occurrence. If you’re unable to get it started again, then you may need to have it towed. However, before calling the tow truck, try the methods we’ve outlined below in order to restart your Prius after it has stalled.
Are there any problems with the 2009 Toyota Prius?
See all problems of the 2009 Toyota Prius . Driving on sb hwy 35 at 74mph, master warning light came on and vehicle shut down, no electrical or engine control. Pulled safely to shoulder of road. Car would not restart. Got out of car, locked car, unlocked car (Toyota technician instructions), then car restarted.
How to re-start your second generation Prius?
Step 1: Press and hold the “Start” button. Hold the Start button down with your index finger for at least 45 seconds. Hold the Start button down with your index finger for at least 45 seconds. Step 2: Restart the car .
Is there a fix for no dash lights on a Prius?
2004-2009 Toyota Prius no dash lights fix! – YouTube 2004-2009 Toyota Prius no dash lights fix! If playback doesn’t begin shortly, try restarting your device.
What’s the best way to re-start a Prius?
Step 1: Press and hold the “Start” button. Hold the Start button down with your index finger for at least 45 seconds. Step 2: Restart the car. Start the car normally after the system has rebooted by pushing down on the brake and pressing the Start button again.
Why does my Prius beep when I open the door?
Beeping Prius are only if you have the Smart Entry & Smart Start option. If you remote lock your doors (either by the fob or by the Smart black buton, but NOT the inside the door button), the Prius will not lock (flash lights, beep if you have Smart) if a door is open. The reason for the specialized battery is location, not just size.
Can a Prius be started without a hybrid battery?
Without the 12v battery, which powers up the car’s computers and connects up the hybrid battery, you cannot start your Prius. The hybrid battery is the one that starts the gas engine, but the hybrid battery isn’t connected until the computers are powered up by the 12v battery…
Can a Prius be charged when the car is off?
Problem is, the 12v accessory outlets are powered off when the car is off, so a solar charger plugged directly into the outlets will not work. You’d have to wire it directly to the 12v accessory battery. (The classic Prius also shuts off its outlets when the car is off. Coastaletech does have a jumper mod to make the outlet always on, though.)
What to do if your Prius loses power?
In the event of a hybrid system fault, the Prius and Prius V are meant to enter a failsafe mode to let owners get the car home without too much trouble. However, if the failsafe mode isn’t activated due to an internal issue, drivers could lose power and the car may stall. The loss of power while driving increases the risk of a crash.