How do you reset the fuel gauge on a Toyota 4Runner?
�� 1999 and 2000 model year 4Runner.
- After replacing the meter circuit plate or inclination sensor, move the vehicle to a level.
- With the ignition switch in the “OFF” position, press and hold the trip reset button.
- Continue pressing the trip reset button while turning the ignition switch to the “ON”
Why is my gas gauge reading wrong?
The most common problem that causes the fuel gauge to read incorrectly is a bad fuel sending unit. This ensures that the driver is aware of the fuel level at all times, as well as warn when the vehicle is low on fuel, and when to visit a gas station before the tank is completely empty.
Why does my Toyota 4Runner engine not start?
As of recently, it has become parked because it doesn’t want to fire right up. It cranks, but fuel doesn’t seem to be going through it. I have replaced from the fuel pump, filter, 3 relays that pertained to it, and still nothing!
Is the engine cranks but no start a problem?
Engine cranks, but no start! Discussion in ‘ 3rd Gen 4Runners (1996-2002) ‘ started by ZO4, Jun 28, 2018 . My 4Runner last week was working just fine, able to crank and start up with not a problem. As of recently, it has become parked because it doesn’t want to fire right up.
Why does my Toyota Prius not start up?
If you get no lights and your battery is working, the ignition switch could be to blame. If you get dash lights, then turn the key to start to see if the lights go out on the dash. If the lights go out, your ignition switch is okay. Starter Connection – Corrosion on the starter can keep the car from starting.
What to do if your fuel pump won’t start?
Use a circuit tester to check all the electrical connections to the fuel pump. Turn the key to ON. If you see a current, then it is not the pump. If there is no current, check the fuse.