Which wire is the parking brake wire?
light green wire which is the parking brake wire that comes with the Pioneer harness.
Where do you connect P cont wire?
You can splice it in at the back of the radio or ignition switch. Another option would be a fuse tap at the fuse box. There will not be a plug in spot on the factory radio. An aftermarket radio would have an amp turn on wire to hook to.
Can I connect parking brake wire to ground?
Just wire it to ground. It’s supposed to keep you from playing dvd’s and making calls when the parking brake is disengaged, but you can just keep it constantly fooled by grounding it.
Can I ground the parking brake wire?
Strip the ends off of the wire that is supposed to be connected to the parking brake, the ground for the dvd player and the ground wire from the car. You only need about 1/2 inch to 1/4 inch of exposed wire.
How do you bypass the parking brake wire on a DVD player?
How to Bypass an Automobile DVD Player’s Parking Brake Safety…
- Pull the unit from your dash (assuming it is installed already).
- Find the ground wire (-12 volt).
- Strip the ends off of the wire that is supposed to be connected to the parking brake, the ground for the dvd player and the ground wire from the car.
What do I connect the remote wire to?
The remote turn on wire must be connected to part of the vehicle’s electrical system that only turns on when the ignition is in the ACCESSORY or ON position.
What is the parking brake wire on a Kenwood?
On the Kenwood units the parking brake wire is light green, if you want video anytime connect this wire to a GROUND (negative). Make sure not to connect this wire to a hot (positive) or you will fry your new dvd player. Now be aware that in most states it is illegal to have video playing where the driver can watch.
Do you need a wiring diagram for a Kenwood car stereo?
Each component ought to be placed and connected with other parts in particular way. Otherwise, the structure won’t function as it should be. So as to make sure the electric circuit is constructed correctly, Kenwood Car Stereo Wiring Diagram is necessary.
What does black dot mean on Kenwood car stereo wiring diagram?
All of it depends on circuit that’s being constructed. As stated previous, the lines at a Kenwood Car Stereo Wiring Diagram signifies wires. Sometimes, the cables will cross. But, it doesn’t mean link between the wires. Injunction of 2 wires is generally indicated by black dot in the junction of two lines.
Where do you put the parking brake wire?
The “parking brake” wire from the radio would go on the center terminal of the switch and the wire coming up from the parking brake would go on either of the other terminals and then lastly a ground wire on the third terminal. This will give you your either or switching you want