Where is the TPMS reset button on a 2013 Toyota Camry?
The reset button is on the instrument panel to the right of the steering wheel.
How do you reset the tire pressure light on a 2013 Toyota Camry?
Models of the Toyota Camry that are year 2013 and 2014 and earlier do not have a reset button for the Tire Pressure Warning System. The system works automatically. Inflate the tires to the recommended pressure, then drive the vehicle straight at approximately 25mph or more for about 10 to 30 minutes.
How do you reset the tire pressure light on a 2013 Toyota Corolla?
Switch the ignition to “ON“. Locate the tire pressure reset button located on instrument panel, knee bolster or inside glove box. Press and hold the button until the tire pressure light flashes 3 times. Wait for about 3 minutes, then turn the ignition to “LOCK” or “OFF“, and you’re done.
What is the correct tire pressure for a 2013 Toyota Camry?
Recommended tire pressure for 2013 Toyota Camry is 33 psi to 35 psi for front tires and 33 psi to 35 psi for rear tires.
How do you reset the tire pressure on a Toyota Camry?
Turn ignition on, but do not start. Open glove box, and to the left of the glove box, hidden down under a little lip, is a reset button. Press and hold the button until the TPMS light blinks slowly 3 times. Release reset button and turn inition off. Start engine and drive vehicle until light goes out.
What does TPMS light on Toyota Camry mean?
2007-2021 Toyota Camry Tire Pressure System TPMS Light Reset Guide Tire pressure monitoring system (TPMS) or also known as TPWS on Toyota cars is a system that provides a real tire pressure report to the driver.
Where is the reset button on a Toyota Camry?
Open glove box, and to the left of the glove box, hidden down under a little lip, is a reset button. Press and hold the button until the TPMS light blinks slowly 3 times. Release reset button and turn inition off. Start engine and drive vehicle until light goes out.
How do you reset the tire pressure warning light?
Within 30 seconds of turning the ignition ON, press and hold the tire pressure warning reset switch (located at left side of glove compartment opening) until the tire pressure warning light blinks 3 times at one-second intervals. See Fig. 4. 5. Wait 2 – 3 minutes, with the ignition ON, for the initialization process to complete.