What does the key button do on a Prius?
Many models of Prius come with a smart key that does not need to be inserted in the ignition. Instead, a power button engages the motor and allows you to start driving.
How do you run a diagnostic on a Prius?
On the Prius, you connect a 12 volt battery charger to the 12 volt battery, set the parking brake, place the transmission in park, insert the ignition key and turn the ignition on. Then you leave it on for at least 30 minutes. The computer will recognize the key, sync itself with the key and reset the immobilizer code.
Can I lock my smart key in my car?
The owner’s manual says “the doors cannot be locked when the smart entry remote is inside the vehicle.” On the same page the manual also says “Make sure you have the key in your hand before locking the door to prevent it from being locked in the vehicle.”
Does a Prius battery ever fully charge?
Does the battery ever get completely charged? Nope. Like others noted ICE controls the battery charge level to prolong the life and even if you manage to charge the battery to level 8 going down from 500 ft long hill, ICE would increase a battery usage to drop the charge level.
Can you drive a Prius with a dead key?
A dead key fob will not prevent you from entering and starting any modern automobile. Here’s the trick to opening and then starting the Toyota Prius even with a dead fob. The methods vary a bit from automaker to automaker, but with all Toyota vehicles, the method to unlock and then start the vehicle is the same.
How far can a Prius go without the key?
So the Prius can go at least 40 miles without a key fob, as long as the engine is already running when the key leaves the vehicle.
How does the push button start system work on a Prius?
Accessories such as the radio operate. Pressing the “POWER” switch briefly withoutdepressing the brake pedal in the“OFF” mode turns on this mode. In the “ACC” mode, pressing the “POWER”switch briefly while depressing thebrake pedal will start the hybrid system.
Where is the power switch on a Prius?
Insert the key and press the “POWER”switch briefly with the brake pedal depressed. For starting tips, see “How to start thehybrid system—” on page 350. If, in an emergency, you must turn thehybrid system off while the vehicle ismoving, press the “POWER” switch morethan 3 seconds.
Why is my Toyota Prius not turning on?
In the following conditions, contactyour Toyota dealer as soon as possible. If the indicator on the switchflashes in amber, the system maybe malfunctioning. Once you turnthe power off, it may not turn onagain. If you find anything unusual in theswitch function, refrain from usingthe vehicle.
How does the hybrid system work on a Toyota Prius?
In the “IG−ON” mode, pressing the“POWER” switch briefly while depressingthe brake pedal will start the hybrid system.However, if “N” position is selected,the hybrid system will be turned in the“OFF” mode. The hybrid system is off. The key canbe removed at this position.